The Radar is a fun and lively three strut kite, combining sophisticated performance with unadulterated simplicity. Its blend of function and versatility make this kite perfect for just about any riding style. The high sweep and low aspect ratio make the kite ultra-responsive and great for downloops. It provides immediate response with just about any input given to the control system. A simple bridle and thinned profiles keep the power in check, while still providing all the power you’ll want or need. It has a well-balanced, full body, and swept wings which make the kite shockingly easy to relaunch. The generously curved leading edge makes the kite roll into the relaunch position with very little input from the rider. The Radar excels as a crossover kite, making progress easy, whether you’re into freeride, freestyle, or powered up surf.
Ultra responsive and easy to turn
Consistent and stable pull
Light bar pressure
Progress made easy
2DR Double Ripstop: Cabrinha’s exclusive line of high-quality woven fabrics has been designed specifically for kitesurfing. Unlike many of the generic sailcloths available in today’s kites, the Volae materials have been specially developed to our exact specifications. The development process has taken over 5 years to create this dedicated kite material, which delivers the lowest stretch and highest durability on the market.
Skeletal Frame: All Cabrinha kites are designed and built on a Skeletal Frame foundation. We start by placing the most durable, 160 gsm Dacron material into a framework that locks in the intended shape. We then create the canopy shape and profiles with a light weight yet highly durable 53 gsm polyester woven material. We build on the durability of the canopy material with a second layer of 53 gsm two-ply material over the high stress strut sections. Next, we layer into the perimeter a 75 gsm, double ripstop reinforcement material to combat the extreme loads that are placed on the trailing edge and wing tip areas of the kite. Finally, we complete the kite with details such as molded EVA chafe protectors, robust leading edge protectors, and triple row stitching at the high stress inter-segment seams near the center of the kite. We seal it all up with a woven nylon ribbon reinforcement on the leading edge closing seam.
Dynamic Arc: A dynamic arc allows the kite to have two distinct arc shapes. The kite takes on one shape while flying, and another shape while in resting mode on the water. The flying shape occurs as soon as the kite gets airborne and the front lines are under tension. The flying shape is the kite’s intended shape which is optimized for the intended usage. The arc shape is held in place by a simple set of bridling. The dynamic arc shape occurs when the kite is not in flight, such as when the kite is resting on the water in relaunch mode. The dynamic arc allows the kite to open its span and orient the wingtips in a position to facilitate a super quick relaunch.
Sprint Airlock: The Sprint Inflation System with Airlock is the most efficient and easy way to get your kite pumped up. The large one-way Airlock valve quickly feeds air into all of the struts from a single location. The Airlock connection to the Sprint pump now requires no special adapters. Once inflated, you can lock off each strut independently to keep your kite’s rigid frame, and isolate any accidental strut deflation from the rest of the kite. When the session is over, the entire kite will deflate in seconds thanks to the Airlock valve’s large dump feature.
Power Control: Power Control settings quickly adjust the power level of the kite. Each rear line “pig tail” connector has three power positions which you can connect to. The middle position is the factory recommended position. Create more power by connecting the knot closest to the kite or less power by connecting to the knot closest to the rider.
Pure Profile Panels: The layout starts in segmented sections in the design software, but, in-flight its natural shape is a smooth arc. In order to make the transition between segmented and curved, we doubled the aerodynamic control by cutting each canopy panel in half at the center section, providing the ultimate curvature control which is where 90% of the performance comes from. When a kite is clean and smooth it will be faster through the sky giving you a broader range of performance.
A-B Wingtip Settings: We offer multiple tuning options this season which completely change the way a kite flies. These options allow you to customize the feedback and bar pressure, adjust where the kite sits in the window, and balance the power/ de-power range of the kite. Cabrinha highly recommends testing the different settings for yourself to find out what feels the best to you. A = The lightest bar pressure and lightest steering initiation; B = Much more feedback, more bar pressure, shortened depower, and more steering impulse to know where the kite is.
1X Security System: The 1X is not a depower system, it is a full blown shut down system. The 1X relies on only one line to immediately shut down the power of the kite whether it be on land or water in all wind conditions.
For more info on the 2017 Cabrinha Radar and to pre-order your kite, give us a call on 01202 738448
Use the slider and table below for an example of finance options available on this product.
You can apply for finance when checking out.
|Finance||Months||APR||Monthly Instalments||Total Payable|
|6 Months Interest Free Credit (0% APR)||£||£|
|12 Months Interest Free Credit (0% APR)||£||£|
|24 Months Promotional Credit (19.9% APR)||£||£|
|48 Months Promotional Credit (19.9% APR)||£||£|
|60 Months Promotional Credit (19.9% APR)||£||£|
Orders received by 2PM Monday-Friday are normally despatched the same day. (Large items may take longer)
Next day delivery in the UK is charged at £6.95.
Standard delivery in the UK takes 3 - 5 working days and is free with orders over £30. For further information please view our Delivery & Returns Policy.
No product reviews yet.