Surface2Air Sports

[Barney]

The council have discussed the signs at their last meeting on monday night and are fine with where we want to put them, but the said I had to clear it with the environment agency who maintain that scaffolding. I rang them and they said no problem.

So its all go ahead.....

You can see a draft of the sign and a pic of where its going to go at http://www.pixagogo.com/5981924108

Does anyone have any other input on what it should say, or anything really about it? I've put the most important points in I think and I dont want to get much more text on there because it'll just put people off reading it.

As soon as these are up (within a week or so hopefully) we should all be using the zone when kiting at Dymchurch.

Barney

[mattbeehere]

Looks great mate.. good job.

Let me know if you need a hand putting them up..

[sol]

Barney,

I should be able to get something from work for the signs, i need to go down and get a look at where there going and one of the signs (have you got them) to see the best way to fix them and so they cant be stolen.

When would be a good time to pop down are you about

Be good to pop by, next time if heading down that way for a surf.

Chris Sol

[Barney]

Cheers mate, appreciated...

if you click that link I've put in below I've added a couple more photos onto it of the railings with the existing environment agency sign.

We haven't made the signs yet - The graphic is basically ready to go – I was thinking that we need a metal plate like the one they’ve used with that kind of rail attachment across the back of it (see the pic – it must be a standard sign component I guess), and then we’ll get the graphic printed to a vinyl sticker and slap it on the front.

Will probably get a sheet of Perspex and bolt it over the top too so that when the local pikeys inevitably graffiti it we can just replace the Perspex and not the whole sign.

I think we’ll prob have two signs – one on each of the end bits of rail – facing in opposite directions.

Barney

[KL 4070]

If you can use u-clamps to fix the signs give me a shout and let me know how many you need , i have loads at work.... exhaust clamps in many sizes.
_________________
If at first you dont succeed,,,,, skydiving is not for you!

[sol]

KL,
Those exshust clamp could be useful, im planning to go by the site next time i head done that way for a surf. (hopefully this weekend)
If your up for a surf some time let us know and we could pop by the site on the way and you could let us know if any of your clamps would work.

Chris Sol

[KL 4070]

Hi Chris, i hope to be going surfing on saturday......(if my board has come in at the shop) otherwise i will have to do the old body dragging thing again!
I could always bring a handful of clamps with me , let me know !
_________________
If at first you dont succeed,,,,, skydiving is not for you!

[deano]

are the signs up yet
_________________
deano

[deano]

any luck with wot we said about the signs ang
_________________
deano

[Angelo]

no not yet anyone know who could make them!!! we have been quoted far too much! £90 + vat
Angelo