2018 Brunotti Boomer Kite Surfboard

Also consider

<h2>2019 Airush Converse V12 Kite Surfboard Now Available At S2AS</h2> <ul> <li>Dedicated down-the-line shape.</li> <li>High rocker design for maximum snap.</li> <li>Narrow width for maximum control.</li> </ul> <h3>TRACTION PAD AND FINS INCLUDED</h3> The Converse is our dedicated down-the-line shape, developed without compromise to destroy any wave you put in front of it. The high tail rocker works together with the three-quarter hip section and the rounded pin tail to maximize maneuverability, enabling massive off-the-top snaps and tight, driving bottom turns. The higher entry rocker through the nose enables the Converse to fit vertically into the steepest wave section. When driving off the bottom or setting up for a more powerful full rail top turn, the narrower nose width pulls the nose around just when you need it. As the longest of the Airush surf range, the additional rail length enhances stability at speed, making the Converse ideal for bigger down-the-line waves, while the narrower width also suits high wind conditions. 5’11” (181cm) | 18” (46cm) | 2” (5.1cm) | 22L 5’11” (181cm) | 18.75” (47.6cm) | 2.1” (5.3cm) | 25.9L Custom Epoxy Custom Epoxy offers the flex and feel of a classic surfboard, with the increased durability of the kite specific construction.  We start with a medium-density EPS core (35 Kg/per m3, for the tech heads) developed from our premium fused EPS technology. When using a single skin construction, a denser core is ideal, specifically in the thinner, lower volume boards, such as the Converse.  Covering the core, the laminate has been extensively reinforced to deal with the demands of kiting with up to five layers in the standing area, and a final layer of Innegra under the heels. Innegra is the lightest fiber commercially available (lighter than water) and can dissipate tremendous amounts of energy, making it ideal for high impact areas.  Custom EPS offers the flex and feel of a classic surfboard, with the increased durability of the kite specific construction. All custom epoxy surfboards include footstrap inserts. Shape 1: Curve in the hip & tail area for maximum snap off the top. 2: Most tail rocker for turning and control. 3: Narrowest width for high speed turns and control. 4: The wide point on the Converse is further back to keep the board loose and responsive. 5: Longest length for most control at speed. 6: Most nose rocker for vertical surf. 7: Narrowest nose to pull the nose around in top turns. 8: Tail - 1.5mm Single concave, blending to 1mm Panel V. 9: Mid - 2mm Single concave. 10: Nose - 1mm Single concave. 11: High performance rail. ECOBOARD PROJECT APPROVED Our ongoing quest is to develop the highest performing Directional Surf and Foil Kiteboards on the market, while reducing our environmental impact. As an industry first, we have teamed up with Sustainable Surf to develop a full line of Directional Surf and Foil Kiteboards that comply and exceed the Ecoboard fundamentals of: • A measurably reduced carbon footprint • Renewable, recycled and/or up-cycled material inputs • Optimizing materials and processes that reduce toxicity during manufacturing Futures. Fins All Airush surf directional kiteboards are Futures. compatible.  Take a look at the AK Durable Supply Co. fin options online.

2019 Airush Converse V12 Kite Surfboard

£865.00

<h2>2019 Airush Amp II V2 Custom Epoxy Kite Surfboard Now Available At S2AS</h2> <ul> <li>Dedicated all-round surf shape.</li> <li>Flat nose rocker for early planing.</li> <li>High curve outline for maneuverability.</li> </ul> <h3>TRACTION PAD AND FINS INCLUDED</h3> The AMP II was developed directly from our favorite dedicated all-round surf shape, combining a flat rocker for high speed and control, with a higher curve outline to optimize the maneuverability. The narrower diamond tail is ideal for kiting, as it maintains control at high speed while the wider center and fuller nose work with the flat rocker to optimize the low wind performance. The bottom shape features a single to double concave through the center section to absorb chop and offer a smooth ride. The winger channels introduce more rocker into the tail section for added snap off the top, while keeping a fast rail rocker for drive through the bottom turn. The AMP II is the ultimate blend of drive and maneuverability, ideal for less powerful surf and onshore days. Ride it one size smaller for higher wind and flat water boosting or one size bigger for surfing and kiting crossover. The AMP II sets a new paradigm in smaller wave performance, but will surprise you in all conditions. 5’2” (157cm) | 18.5″ (47cm) | 2.2″ (5.6cm) | 22.5L (Custom Epoxy Only) 5’4” (163cm) | 19” (48.6cm) | 2.3” (5.8cm) | 25.4L 5’6” (168cm) | 19.5” (49.5cm) | 2.4” (6.1cm) | 28L 5’8” (173cm) | 20” (50.8cm) | 2.5” (6.35cm) | 31L Custom Epoxy Custom Epoxy offers the flex and feel of a classic surfboard, with the increased durability of the kite specific construction.  We start with a medium-density EPS core (35 Kg/per m3, for the tech heads) developed from our premium fused EPS technology. When using a single skin construction, a denser core is ideal, specifically in the thinner, lower volume boards, such as the Converse.  Covering the core, the laminate has been extensively reinforced to deal with the demands of kiting with up to five layers in the standing area, and a final layer of Innegra under the heels. Innegra is the lightest fiber commercially available (lighter than water) and can dissipate tremendous amounts of energy, making it ideal for high impact areas.  Custom EPS offers the flex and feel of a classic surfboard, with the increased durability of the kite specific construction. All custom epoxy surfboards include footstrap inserts. Shape 1: Curve in the hip and tail area for maximum snap off the top. 2: Low tail rocker for speed. 3: Wide center for early planing. 4: Wide point relatively far forward for control at speed. 5: Reduced length to assist maneuverability.  6: Full nose with a large amount of curve for planing and maneuverability. 7: Flat nose rocker for early planing. 8: Tail - 1.5mm Single concave, blending to 1mm Panel V. 9: Mid - 1.8mm Inverted Spiral V. 10: Nose - 1.4mm Spiral V. 11: High apex rail. Ecoboard Project Our ongoing quest is to develop the highest performing Directional Surf and Foil Kiteboards on the market, while reducing our environmental impact. As an industry first, we have teamed up with Sustainable Surf to develop a full line of Directional Surf and Foil Kiteboards that comply and exceed the Ecoboard fundamentals of: • A measurably reduced carbon footprint. • Renewable, recycled and/or up-cycled material inputs. • Optimizing materials and processes that reduce toxicity during manufacturing. Futures. Fins All Airush surf directional kiteboards are Futures. compatible.  Take a look at the AK Durable Supply Co. fin options online.

2019 Airush Amp II V2 Custom Epoxy Kite Surfboard

£845.00

<h2>2019 Airush Amp II V2 Reflex Carbon Innegra Kite Surfboard Now Available At S2AS</h2> <ul> <li>Dedicated all-round surf shape.</li> <li>Flat nose rocker for early planing.</li> <li>High curve outline for maneuverability.</li> </ul> <h3>TRACTION PAD AND FINS NOT INCLUDED</h3> The AMP II was developed directly from our favorite dedicated all-round surf shape, combining a flat rocker for high speed and control, with a higher curve outline to optimize the maneuverability. The narrower diamond tail is ideal for kiting, as it maintains control at high speed while the wider center and fuller nose work with the flat rocker to optimize the low wind performance. The bottom shape features a single to double concave through the center section to absorb chop and offer a smooth ride. The winger channels introduce more rocker into the tail section for added snap off the top, while keeping a fast rail rocker for drive through the bottom turn. The AMP II is the ultimate blend of drive and maneuverability, ideal for less powerful surf and onshore days. Ride it one size smaller for higher wind and flat water boosting or one size bigger for surfing and kiting crossover. The AMP II sets a new paradigm in smaller wave performance, but will surprise you in all conditions. 5’2” (157cm) | 18.5″ (47cm) | 2.2″ (5.6cm) | 22.5L (Custom Epoxy Only) 5’4” (163cm) | 19” (48.6cm) | 2.3” (5.8cm) | 25.4L 5’6” (168cm) | 19.5” (49.5cm) | 2.4” (6.1cm) | 28L 5’8” (173cm) | 20” (50.8cm) | 2.5” (6.35cm) | 31L Reflex Carbon Innegra In our quest to develop the lightest performance surfboard on the market with increased flex and response, we introduced the Reflex Carbon Innegra construction. The first key ingredient is our flyweight core where the unique molding process creates an extremely light core, less than half the weight of a traditional surf core, but with a dense outer skin created through a specific molded core for each board size.  The second key ingredient is our tough Corecell sandwich layer on the top and bottom skin. This unique material keeps the top and bottom deck from buckling while preserving the flex characteristics. We also don’t sandwich the rail, which enhances the flex further.  The final outer skin comprises of a Biaxial Carbon fiber bottom deck and a unique Biaxial Carbon Innegra top deck. This fanatical use of biaxial fibers results in an extremely high-performance skin that enables the board to flex significantly while still being extremely durable and responsive.  The Reflex Carbon shapes do not have footstrap inserts. If you use the new AK stick on straps, insert positions are indicated on the board. Shape 1: Curve in the hip and tail area for maximum snap off the top. 2: Low tail rocker for speed. 3: Wide center for early planing. 4: Wide point relatively far forward for control at speed. 5: Reduced length to assist maneuverability.  6: Full nose with a large amount of curve for planing and maneuverability. 7: Flat nose rocker for early planing. 8: Tail - 1.5mm Single concave, blending to 1mm Panel V. 9: Mid - 1.8mm Inverted Spiral V. 10: Nose - 1.4mm Spiral V. 11: High apex rail. Ecoboard Project Our ongoing quest is to develop the highest performing Directional Surf and Foil Kiteboards on the market, while reducing our environmental impact. As an industry first, we have teamed up with Sustainable Surf to develop a full line of Directional Surf and Foil Kiteboards that comply and exceed the Ecoboard fundamentals of: • A measurably reduced carbon footprint. • Renewable, recycled and/or up-cycled material inputs. • Optimizing materials and processes that reduce toxicity during manufacturing. Futures. Fins All Airush surf directional kiteboards are Futures. compatible.  Take a look at the AK Durable Supply Co. fin options online.

2019 Airush Amp II V2 Reflex Carbon Innegra Kite Surfboard

£1049.00

<h2>2019 Airush Amp II V2 Reflex Bamboo Kite Surfboard Now Available At S2AS</h2> <ul> <li>Dedicated all-round surf shape.</li> <li>Flat nose rocker for early planing.</li> <li>High curve outline for maneuverability.</li> </ul> <h3>TRACTION PAD AND FINS NOT INCLUDED</h3> The AMP II was developed directly from our favorite dedicated all-round surf shape, combining a flat rocker for high speed and control, with a higher curve outline to optimize the maneuverability. The narrower diamond tail is ideal for kiting, as it maintains control at high speed while the wider center and fuller nose work with the flat rocker to optimize the low wind performance. The bottom shape features a single to double concave through the center section to absorb chop and offer a smooth ride. The winger channels introduce more rocker into the tail section for added snap off the top, while keeping a fast rail rocker for drive through the bottom turn. The AMP II is the ultimate blend of drive and maneuverability, ideal for less powerful surf and onshore days. Ride it one size smaller for higher wind and flat water boosting or one size bigger for surfing and kiting crossover. The AMP II sets a new paradigm in smaller wave performance, but will surprise you in all conditions. 5’2” (157cm) | 18.5″ (47cm) | 2.2″ (5.6cm) | 22.5L (Custom Epoxy Only) 5’4” (163cm) | 19” (48.6cm) | 2.3” (5.8cm) | 25.4L 5’6” (168cm) | 19.5” (49.5cm) | 2.4” (6.1cm) | 28L 5’8” (173cm) | 20” (50.8cm) | 2.5” (6.35cm) | 31L Reflex Bamboo Reflex Bamboo combines incredible flex with a durable sandwich outer layer, making it ideal for the rider looking for a bombproof and reliable performance construction.  The unique bamboo top deck progressive flex is achieved through a variable orientation, where the nose area features a longitudinally oriented bamboo section, the center section a 45-degree bias, and the tail section a horizontal orientation.  Using the same medium density core as our Custom Epoxy construction, but have removed the traditional wood stringer and have added a flex bamboo sandwich layer and an additional longitudinally oriented bamboo center panel on the bottom deck.  To top this off we include a UD Flax rail, which strengthens the rail section while improving impact resistance. UD Flax offers nearly 50% better performance in tensile elongation than regular glass, with significantly improved environmental credentials.  The Reflex Bamboo shapes do not have footstrap inserts. If you use the new AK stick on straps, insert positions are  Shape 1: Curve in the hip and tail area for maximum snap off the top. 2: Low tail rocker for speed. 3: Wide center for early planing. 4: Wide point relatively far forward for control at speed. 5: Reduced length to assist maneuverability.  6: Full nose with a large amount of curve for planing and maneuverability. 7: Flat nose rocker for early planing. 8: Tail - 1.5mm Single concave, blending to 1mm Panel V. 9: Mid - 1.8mm Inverted Spiral V. 10: Nose - 1.4mm Spiral V. 11: High apex rail. Ecoboard Project Our ongoing quest is to develop the highest performing Directional Surf and Foil Kiteboards on the market, while reducing our environmental impact. As an industry first, we have teamed up with Sustainable Surf to develop a full line of Directional Surf and Foil Kiteboards that comply and exceed the Ecoboard fundamentals of: • A measurably reduced carbon footprint. • Renewable, recycled and/or up-cycled material inputs. • Optimizing materials and processes that reduce toxicity during manufacturing. Futures. Fins All Airush surf directional kiteboards are Futures. compatible.  Take a look at the AK Durable Supply Co. fin options online.

2019 Airush Amp II V2 Reflex Bamboo Kite Surfboard

£809.00

<h2>2019 Airush Comp V2 Reflex Bamboo Kite Surfboard Now Available At S2AS</h2> <h2>ALL-ROUND PERFORMANCE</h2> <ul> <li>Competition and all-round performance.</li> <li>Intermediate fast rocker for speed.</li> <li>New generation fin positioning and tail shape for snap.</li> </ul> <h3>TRACTION PAD AND FINS NOT INCLUDE</h3> The Comp earns its name our performance competition shape, blending speed with agility. Starting with the bottom curve, the Comp features a relatively flat tail rocker for speed and acceleration with a medium/high nose rocker for larger surf and more top to bottom riding. The outline is comprised of a moderate width center, for early planing and drive, with a relatively narrow tail for edging and snap, and narrow nose to drive through powered top turns. We moved the thruster setup back to compensate for the fast rocker, keeping all the snap of a high tail rocker board, without sacrificing speed. If you need one wave board to perform in any conditions you throw at it, the Comp is your board of choice. 5’8” (173cm) | 18.25” (46.4cm) | 2.25” (5.7cm) | 24.3L 5’10” (178cm) | 18.75” (47.6cm) | 2.3” (5.9cm) | 26.9L 6’0” (183cm) | 19.25” (49cm) | 2.4” (6.1cm) | 29.7L Reflex Bamboo Reflex Bamboo combines incredible flex with a durable sandwich outer layer, making it ideal for the rider looking for a bombproof and reliable performance construction.  The unique bamboo top deck progressive flex is achieved through a variable orientation, where the nose area features a longitudinally oriented bamboo section, the center section a 45-degree bias, and the tail section a horizontal orientation.  Using the same medium density core as our Custom Epoxy construction, but have removed the traditional wood stringer and have added a flex bamboo sandwich layer and an additional longitudinally oriented bamboo center panel on the bottom deck.  To top this off we include a UD Flax rail, which strengthens the rail section while improving impact resistance. UD Flax offers nearly 50% better performance in tensile elongation than regular glass, with significantly improved environmental credentials.  The Reflex Bamboo shapes do not have footstrap inserts. If you use the new AK stick on straps, insert positions are Shape 1: Wingers reduce width in tail area for control and bite at speed. 2: Intermediate tail rocker combining planing and snap. 3: Intermediate width for high speed turns and control. 4: Intermediate wide point combining turning and control at speed. 5: Intermediate length for control and maneuverability.  6: Intermediate width nose for improved completion of turns. 7: Intermediate nose rocker combining planing and vert capabilities. 8: Tail - 4mm Single concave. 9: Mid - 4mm Single concave. 10: Nose - 1.5mm Single concave. 11: Intermediate performance rail. Ecoboard Project Our ongoing quest is to develop the highest performing Directional Surf and Foil Kiteboards on the market, while reducing our environmental impact. As an industry first, we have teamed up with Sustainable Surf to develop a full line of Directional Surf and Foil Kiteboards that comply and exceed the Ecoboard fundamentals of: • A measurably reduced carbon footprint. • Renewable, recycled and/or up-cycled material inputs. • Optimizing materials and processes that reduce toxicity during manufacturing. Futures. Fins All Airush surf directional kiteboards are Futures. compatible.  Take a look at the AK Durable Supply Co. fin options online.

2019 Airush Comp V2 Reflex Bamboo Kite Surfboard

£829.00

Kitesurfing Equipment

Kitesurfing Lessons

Used Equipment

Wakeboarding Equipment

Used Equipment

Water Inflatables

Waterski Equipment

Snowboard Equipment

Snow Promotions

Mens Snow Wear

Womans Snow Wear

Skiing Equipment

Longboards

Mountainboards

Electric Skate

Summer Wetsuits

Winter Wetsuits

Wetsuit Accessories

Skimboards

Surfboards

Bodyboards

Stand Up Paddle Boards

Stand Up Paddle Board Accessories

Kayak

Cycle Equipment

Luggage

Mens Clothing

Accessories

Womens Clothing

Sale Kitesurfing

Sale Wake

Sale Snow

Sale Wetsuits

Sale Surf

Sale SUP

Sale Lifestyle

2018 Brunotti Boomer Kite Surfboard

Take a look at the new 2018 Brunotti Boomer Kite Surfboard at S2AS!

Features: