Surface 2 Air Sports01202 738 448Known as S2AS on the lake, on the beach or on the mountain. Established in 2002 Surface 2 Air Sports has become known, as the rider owned rider run extreme sports leaders in the UK.FacebookInstagramTwitterYoutubeGoogplePlusPinterest
The new Stomp Pad's from Volcom has got a lot better, a new rubber design with spiked grip means your feet won't be floating around your board any more. Perfect for cruising up those tricky Poma/T-bar lifts!
To apply, simply remove the protective film at the back, and stick onto a clean and dry snowboard!
Features:
Rubber Stone Shape with Spiked Grip
Peel and Stick Adhesive 3M Backing
Orders received by 2PM Monday-Friday are normally despatched the same day. (Large items may take longer)
Next day delivery in the UK is charged at £6.95.
Standard delivery in the UK takes 3 - 5 working days and is free with orders over £80. For further information please view our Delivery & Returns Policy.
Also consider
Dakine
Product Code: 35070
<h2><strong>Dakine Modular Mat Stomp Pad</strong></h2> <p>A perfect stomp pad for getting on and off the lifts, when you're unstrapped and you're looking for some stability these stomp pads add that bit of grip when the snow normally covers your board.</p> <p><strong>INSTRUCTIONS</strong></p> <p>1. Board and stomp should be at room temperature, 70 F [ 21 C ]</p> <p>2. Clean surface with rubbing alcohol. The surface must remain clean, smooth and dry. Do not touch.</p> <p>3. Use a blow dryer on high to heat up the prepared board surface as well as the adhesive on the traction device. 4. Immediately after heating, place the stomp and press firmly. Stand on the stomp without twisting, the more weight the better.</p> <p>5. Allow the adhesive to cure at room temperature for 24 hours.</p>
<h2><strong>Dakine Modular Mat Stomp Pad</strong></h2> <p>A perfect stomp pad for getting on and off the lifts, when you're unstrapped and you're looking for some stability these stomp pads add that bit of grip when the snow normally covers your board.</p> <p><strong>INSTRUCTIONS</strong></p> <p>1. Board and stomp should be at room temperature, 70 F [ 21 C ]</p> <p>2. Clean surface with rubbing alcohol. The surface must remain clean, smooth and dry. Do not touch.</p> <p>3. Use a blow dryer on high to heat up the prepared board surface as well as the adhesive on the traction device. 4. Immediately after heating, place the stomp and press firmly. Stand on the stomp without twisting, the more weight the better.</p> <p>5. Allow the adhesive to cure at room temperature for 24 hours.</p>
<h2><strong>Dakine Spike Stomp Pad Now Available At S2AS</strong></h2> <p>One of the longest running products in our lineup of stomp pads, the Spike Stomp is still the best functioning and one of our best sellers. Why? Because the spikes are taller than most, which makes them more effective even with snow buildup. Pilot creases molded into the stomp let you trim down the overall size, or cut into strips to customize your traction.</p> <ul> <li>2 Year Limited Warranty</li> <li>Molded spike pattern for maximum traction</li> <li>Sections can be cut apart and reconfigured</li> <li>Peel and stick adhesive</li> </ul> <ul> <li>4.7" x 4.7" [ 120mm x 120mm ]</li> <li>2.2 oz [ 62g ]</li> </ul>
<h2><strong>Check out the Dakine Pyramid Studs at S2AS!</strong></h2> <p>A perfect stomp pad for getting on and off the lifts, when you're unstrapped and you're looking for some stability these stomp pads add that bit of grip when the snow normally covers your board.</p> <p>They are perfect for giving you reliable footing with your free foot, without taking up a ton of space on your board.</p> <p><strong>Instructions: </strong></p> <p>1. Board and stomp should be at room temperature, 70 F [ 21 C ]</p> <p>2. Clean surface with rubbing alcohol. Surface must remain clean, smooth and dry. Do not touch.</p> <p>3. Use a blow dryer on high to heat up the prepared board surface as well as the adhesive on the traction device. 4. Immediately after heating, place the stomp and press firmly. Stand on the stomp without twisting, the more weight the better.</p> <p>5. Allow the adhesive to cure at room temperature for 24 hours.</p>
<h2><strong>Volcom Stone Stomp Pad (Electric Pink)</strong></h2> <p>The new Stomp Pad's from Volcom has got a lot better, a new rubber design with spiked grip means your feet won't be floating around your board any more. Perfect for cruising up those tricky Poma/T-bar lifts! </p> <p>To apply, simply remove the protective film at the back, and stick onto a clean and dry snowboard!</p> <h3>Features:</h3> <ul> <li>Rubber Stone Shape with Spiked Grip</li> <li>Peel and Stick Adhesive 3M Backing</li> </ul> <p> </p> <p>For more info on the 2016 Volcom Stone Stomp Pad (Electric Pink), give us a call on 01202 738448</p>
A date has not been selected for this lesson. If you would like to select a date, choose cancel and select from the calendar. Otherwise continue with the booking, and contact us on (01202) 738 448 at anytime in the future to select a date.
