The AMP II was developed directly from our favorite dedicated all-round surf shape, combining a flat rocker for high speed and control, with a higher curve outline to optimize the maneuverability.
The narrower diamond tail is ideal for kiting, as it maintains control at high speed while the wider center and fuller nose work with the flat rocker to optimize the low wind performance.
The bottom shape features a single to double concave through the center section to absorb chop and offer a smooth ride. The winger channels introduce more rocker into the tail section for added snap off the top, while keeping a fast rail rocker for drive through the bottom turn.
The AMP II is the ultimate blend of drive and maneuverability, ideal for less powerful surf and onshore days. Ride it one size smaller for higher wind and flat water boosting or one size bigger for surfing and kiting crossover. The AMP II sets a new paradigm in smaller wave performance, but will surprise you in all conditions.
5’2” (157cm) | 18.5″ (47cm) | 2.2″ (5.6cm) | 22.5L (Custom Epoxy Only)
5’4” (163cm) | 19” (48.6cm) | 2.3” (5.8cm) | 25.4L
5’6” (168cm) | 19.5” (49.5cm) | 2.4” (6.1cm) | 28L
5’8” (173cm) | 20” (50.8cm) | 2.5” (6.35cm) | 31L
Custom Epoxy offers the flex and feel of a classic surfboard, with the increased durability of the kite specific construction.
We start with a medium-density EPS core (35 Kg/per m3, for the tech heads) developed from our premium fused EPS technology. When using a single skin construction, a denser core is ideal, specifically in the thinner, lower volume boards, such as the Converse.
Covering the core, the laminate has been extensively reinforced to deal with the demands of kiting with up to five layers in the standing area, and a final layer of Innegra under the heels. Innegra is the lightest fiber commercially available (lighter than water) and can dissipate tremendous amounts of energy, making it ideal for high impact areas.
Custom EPS offers the flex and feel of a classic surfboard, with the increased durability of the kite specific construction. All custom epoxy surfboards include footstrap inserts.
1: Curve in the hip and tail area for maximum snap off the top.
2: Low tail rocker for speed.
3: Wide center for early planing.
4: Wide point relatively far forward for control at speed.
5: Reduced length to assist maneuverability.
6: Full nose with a large amount of curve for planing and maneuverability.
7: Flat nose rocker for early planing.
8: Tail - 1.5mm Single concave, blending to 1mm Panel V.
9: Mid - 1.8mm Inverted Spiral V.
10: Nose - 1.4mm Spiral V.
11: High apex rail.
Our ongoing quest is to develop the highest performing Directional Surf and Foil Kiteboards on the market, while reducing our environmental impact. As an industry first, we have teamed up with Sustainable Surf to develop a full line of Directional Surf and Foil Kiteboards that comply and exceed the Ecoboard fundamentals of:
• A measurably reduced carbon footprint.
• Renewable, recycled and/or up-cycled material inputs.
• Optimizing materials and processes that reduce toxicity during manufacturing.
All Airush surf directional kiteboards are Futures. compatible.
Take a look at the AK Durable Supply Co. fin options online.
Orders received by 2PM Monday-Friday are normally despatched the same day. (Large items may take longer)
Next day delivery in the UK is charged at £6.95.
Standard delivery in the UK takes 3 - 5 working days and is free with orders over £80. For further information please view our Delivery & Returns Policy.