Surface 2 Air Sports01202 738 448Known as S2AS on the lake, on the beach or on the mountain. Established in 2002 Surface 2 Air Sports has become known, as the rider owned rider run extreme sports leaders in the UK.FacebookInstagramTwitterYoutubeGoogplePlusPinterest
<h2><strong>Now available the new Shinn Model P Kitesurf Hydrofoil at S2AS</strong></h2> <p>A sport limited to the rider elite only 2 years ago foil-boarding has come of age as riders of all ages and abilities look to take advantage of its benefits.</p> <p>When asking riders about their reluctance to foil the answer is always the same – it’s too difficult and too dangerous, well we have news for you – the Shinn Model P has changed all that and continues to lead the way in unbelievably safe and easy progress right from day one. Imagine making flying runs during your first 30 minutes with a foil… An impossible dream only 18 months past the Shinn Model P has bought foil-boarding within the reach of any competent TT rider and eliminated the frustrating and painful learning process of only a few short years ago. It’s not just the extreme low speed lift (starting for as little as 10 kph) that makes it so easy but also the predictable and progressive pitch control that eliminates the “rise and crash” scenes previously synonymous with learning to foil and for this season Shinn kiteboarding have added the new larger ST3 stabiliser making it even easier than before.</p> <p>Available with a wide variety of mast lengths for progression at all levels (40, 60, 75 and 90 cm) you can also be sure your investment is not short lived as the foil structure features full modular compatibility with all other wings and stabilisers in the Shinn range allowing fast and cost-effective performance upgrades if and when you are ready for more. </p> <h3><strong>Features:</strong></h3> <p><strong>Carbon Re-enforced Wing</strong><br /> 1150cm² gives amazing low speed lift and pitch control for in-experienced foilers</p> <p><strong>New for 2018 ST3 G10 Stabiliser</strong><br /> New larger stabiliser (280cm²) makes pitch control even easier than before</p> <p><strong>Low Speed Lift, High Angle of Attack Stall</strong><br /> The P wing lifts progressively and gives plenty of warning before stalling and dropping you from the sky</p> <p><strong>Multiple Mast Lengths Range</strong><br /> A mast for every learning stage with 40, 60, 75 and 90 cm lengths available</p> <p><strong>Strike Resistant Design</strong><br /> Top mounting for the delicate composite wings protects them from accidental bottom strikes</p> <p><strong>Quik-Fit plate</strong><br /> Fast and easy foil attachment to any board with 165 x 90 plate spacings without removing the screws</p> <p><strong>Modular Design</strong><br /> Fuselage compatibility with all other Shinn wings and stabilisers for future, cost effective upgrades</p> <p><strong>Padded Travel Case</strong><br /> Supplied in a padded case for minimal space and peace of mind when traveling</p>
<h2><strong>Take a look at the new Shinn Jackson Sunburner Kite Foilboard at S2AS!</strong></h2> <p>Already into it’s 2nd year of production the Jackson Sunburner is still lighter, stiffer and more agile than any other ABS technology foil board on the market whilst maintaining the legendary durability and ease of use Jackson is known for. For this year we added a pocket sized 112cm that is sure to be popular with foiling aficionados.<br /> <br /> Achieving a robust snowboard style construction that’s both stiff (a critical feature for control on a foil board) and light is no easy task but our innovative V-Techmould combined with uni-directional carbonmakes significant gains in both areas. A one piece pad provides the perfect blend of comfort and sensitivity with the perfect balance between grip and durability. The Sunburner also features our unique Trim Track foil connection allowing you to tune your ride andachieve the preferred foil position in the board.<br /> <br /> Available in 3 lengths, 140cm perfect for foil beginners or heavier riders, 128cm for intermediate to advanced riders either strapped or strapless and 112cm for the more experienced riders looking for a minimalist deck with perfect travel-ability.</p> <h3><strong>Construction:</strong></h3> <p>- V Mould for Stiffness<br /> - Uni Directional Carbon Laminate<br /> - Full Wood Core<br /> - Full Deck Pad</p> <h3><strong>Shape and Accessories:</strong></h3> <p>- Flatter Rocker for Faster Take Offs<br /> - Full Nose Outline to Resist Touch Downs</p> <h3><strong>Sizing:</strong></h3> <p>- 112x45cm<br /> - 128x45cm<br /> - 140x45cm</p>
<h2><strong>Take a look at the new Shinn Model K2 Carbon Set Kite Hydrofoil at S2AS!</strong></h2><p>After more than 2 years of development and 30 different prototypes Shinn have finally released their full carbon hydrofoils!<br/><br/>Introduced last year the K2 foil introduced new levels of stability and control in a foil that was fast, easy to use and incredibly pitch stable. For this season Shinn have raised the bar once again by offering this foil with an all new Carbon composite mast. Not happy to simply produce a "black" foil Shinn Kiteboarding needed every to work in perfect harmony, carbon foils offer so much more stiffness (at a lighter weight) than their aluminium counterparts. During foiling the rider is up to 1 metre above the foil, it’s long distance control, 1cm of flex at wing level is magnified by a factor of X to where you stand – imagine trying to push a button with a 1m long flexible stick or driving a car with flat tyres, each control input you make is magnified and delayed causing instability and even the most talented riders to wobble. If your serious about foiling and want to raise your game to the next level carbon is the only way forwards.<br/><br/>Ride further and faster without extreme front foot pressure, agility with stability and a fast track to a more advanced foiling level. With a similar rake and surface area to the model K the secret to this foil is in the combination of the 2-stage anhedral front wing and high aspect, wingletted stabiliser perfectly balancing the foil through a range of speeds. Built using proprietary hi-modulus, multi-axial carbon sandwich construction and featuring an innovative new Hollow-Tech integrated mounting plate with fast mount slide on/off fasteners. This foil uses a dedicated fuselage but is compatible with all existing Shinn wings and stabilisers.<br/><br/>People often ask us at S2AS if it makes sense to have a carbon foil mast and our answer is always "unless you want to spend the money don’t test one as once you try one you will never go back!"</p><h3><strong>Features: </strong></h3><p>- Revolutionary Freeride Foil: Designed for riders wanting to take their foiling to the next level – quickly.<br/>- Hi-Modulus Carbon Wings: Medium/high aspect wing - 866 cm 2 with winglet Stabiliser - 280cm2<br/>- ST3W Carbon Stabiliser with yaw control winglets<br/>- Versatile Speed range: Take off around 12 kph with top speeds >55 kph<br/>- Multiple Mast Lengths: Available with 60cm, 75cm, 90cm and 110cm<br/>- Hollow-Tech Mounting plate: This integrated plate Increases rigidity and decreases weight<br/>- Multi-axial, multi layered, hi-modulus carbon construction: Increased speed, increased stiffness and increased control<br/>- Compatible and Easy: Fast and easy foil attachment to any board (165 x 90 bolt spacings) with either M6 or M8 hardware<br/>- H4Modular Design: Fuselage compatibility with all other Shinn wings and stabilisers<br/><br/></p>
<h2><strong>Take a look at the new Shinn Model Mega K Carbon Set Kite Hydrofoil at S2AS!</strong></h2><p>The Mega K is the most versatile wing in the Shinn range.<br/><br/>Originally designed with Surf and SUP in mind it’s also proved to be exceptionally well suited to kite-foiling in waves and in extreme light winds. With a surprisingly high top speed for a wing of this size and yet still un-believable low speed starting (as low as 8 kph) the Mega K leads us down the path of multi-discipline wings. This season sees a massive performance increase thanks to our new hi-modulus carbon S20.1 stabiliser. Taking on board the lessons learnt during the development of the K2 foil this new stabiliser improves on speed range and pitch stability whilst carving like you can’t believe.<br/><br/>By offering the Model Mega K with Carbon composite mast Shinn have made incredible improvements. Not happy to simply produce a "black" foil Shinn Kiteboarding needed every to work in perfect harmony, carbon foils offer so much more stiffness (at a lighter weight) than their aluminium counterparts. During foiling the rider is up to 1 metre above the foil, it’s long distance control, 1cm of flex at wing level is magnified by a factor of X to where you stand – imagine trying to push a button with a 1m long flexible stick or driving a car with flat tyres, each control input you make is magnified and delayed causing instability and even the most talented riders to wobble. If your serious about foiling and want to raise your game to the next level carbon is the only way forwards.<br/><br/>Designed to provide lift at low speeds and yet retain enough top end to keep it fun the Mega K provides stability and manoeuvrability making it perfect for SUP, SURF or Kitewave foiling in small to medium sized waves. Utilizing a low to mid aspect ratio wing with a high rake delta outline has allowed us to provide the massive speed range needed to handle both starting and control on the wave face. The main wings blended winglets work with the flat stabiliser to give great directional stability without limiting the carving potential even at crazy slow speeds. Built using proprietary hi-modulus, multi-axial carbon sandwich construction and featuring an innovative new Hollow-Tech integrated mounting plate with fast mount slide on/off fasteners. This foil uses a dedicated fuselage but is compatible with all existing Shinn wings and stabilisers.<br/><br/>So why do we recommend the Mega K for extreme light wind kiting as well? Low speed starting is the key where the challenge is to generate enough speed to start foiling. With the Mega K the power needed to water start is already enough to fly and with a top speed in excess of 35 kph you’ll be cruising when even other foilers are left sitting on the beach.<br/><br/>People often ask us at S2AS if it makes sense to have a carbon foil mast and our answer is always "unless you want to spend the money don’t test one as once you try one you will never go back!"</p><h3><strong>Features: </strong></h3><p>- Versatile and Multi-functional: Strapless, Waves, Transitions and Extreme Light Wind<br/>- Hi-Modulus Carbon Wings: Medium/low aspect wing - 1200 cm 2 with down-turned winglet Stabiliser – S20.1<br/>- Amazing Speed Range: Take off around 8kph with top speeds >40 kph<br/>- Multiple Mast Lengths: Available with 60cm, 75cm, 90cm and 110cm<br/>- Hollow-Tech Mounting plate: This integrated plate Increases rigidity and decreases weight<br/>- Multi-axial, multi layered, hi-modulus carbon construction: Increased speed, increased stiffness and increased control<br/>- Compatible and Easy: Fast and easy foil attachment to any board (165 x 90 bolt spacings) with either M6 or M8 hardware<br/>- Modular Design: Fuselage compatibility with all other Shinn wings and stabilisers<br/>- Fast and Versatile Carbon Hydrofoil : Faster, Stiffer, More Stable<br/></p>
<h2><strong>Take a look at the new Shinn K2 Kite Hydrofoil at S2AS!</strong></h2> <p>It’s 2 years since Shinn tore up the rule book and introduced the Model P, a revolution for learning to foil and now they're at it again.</p> <p>Even now there is a chasm in terms of ability needed between beginner and true performance foils, Shinn Kiteboarding aim to close that gap by introducing the Shinn K2 foil. Inheriting the ease of use, early starting and intuitive pitch control from the legendary Model P the all new K2 has an abundance of confidence inspiring stability and control that allows the rider to comfortably handle power and reach speeds that seemed impossible before.</p> <p>Ride further and faster without extreme front foot pressure, agility with stability and a fast track to a more advanced foiling level. With a similar rake and surface area to the model K the secret to this foil is in the combination of the 2-stage anhedral front wing and high aspect, wingletted stabiliser perfectly balancing the foil through a range of speeds.</p> <p>If the P wing was responsible for re-writing the rule book on entry level foiling get ready for the K2 to do the same for the next generation of high-energy freeriders. </p> <h2><strong>Features:</strong></h2> <ul> <li><strong>Hi-modulus carbon: </strong>Medium high aspect wing - 866 cm2</li> <li><strong>Hi-modulus carbon: </strong>Winglet stabiliser - 290 cm2</li> <li><strong>Versatile speed range: </strong>Take off around 12 kph with top speeds > 55 kph</li> <li><strong>Multiple mast lengths</strong>: Available with 40, 60, 75 or 90 cm mast (recommended mast is 90cm)</li> <li><strong>Strike resistant design</strong>:Top mounting for the delicate composite wings protects them from accidental bottom strikes</li> <li><strong>Quik-fit plate</strong>: Fast and easy foil attachment to any board (165 x 90 bolt spacings)</li> <li><strong>Deep socket M6/M8 compatible plate</strong>: Deep socket for extra stiffness you can use this foil with m8 or m6 mounting hardware</li> <li><strong>Modular design</strong>: Fuselage compatibility with all other shinn wings and stabilisers</li> </ul>
Kitesurfing in virtually no wind is now a possibility thanks to the range of Kitesurfing Foils and Boards stocked at Surface 2 Air Sports! We've got the latest and greatest hydrofoils & foil boards from brands such as Airush, Cabrinha,Moses, North Kiteboarding, Shinn, Slingshot Foils and even Xenon. Have a look below or come in our kitesurf shop down in Poole.
For any more info on any of the Kitesurfing HydroFoils on our website, give us a call on 01202 738448!
<h2><strong>Take a look at the Slingshot Hover Glide FKite V4 with S2AS!</strong></h2> <p>Looking for a user friendly and versatile freeride foil set up? Then look no further. The FKITE is equipped with the free-flowing Space Skate wing which provides a super agile and carvy yet surprisingly fast foil for it's size.</p> <p>This setup is stable and forgiving enough for entry-level foilers to learn with and is super agile and playful for more advanced freeriding as you progress.</p> <h3><strong>Features:</strong></h3> <ul> <li>NEW Neoprene wing covers & Custom travel case</li> <li>Our hand-picked package for versatility and user-friendly freeride Kite foiling</li> <li>Space Skate wing has tons of range, playful feel and self-centring flight</li> <li>Great for learning and progression- plenty of lift, forgiving response</li> <li>Super playful side-to-side handling feels like powder turns on a snowboard</li> <li>Hover Glide is a modular system with a wide variety of add-on wings and components</li> </ul> <h3><strong>Package Includes:</strong></h3> <ul> <li>71cm (28") Mast</li> <li>Pedestal,</li> <li>Shift Fuselage,</li> <li>Space Skate 65cm Front Wing</li> <li>42cm rear wing</li> <li>Hardware</li> <li>Shim</li> <li>Neoprene Wing Covers</li> <li>Custom Travel Case.</li> </ul>
<h2><strong>Take a look at the Slingshot Dwarf Craft 3'6" Micro with S2AS!</strong></h2> <p>The Dwarf Craft 3'6" Micro is a thinner version of the original Dwarf Craft. It is the lightest, most agile and most direct feeling kite foil board that Slingshot offers in their lineup. For people that have their footwork and transitions well dialled, this board is a dream, but that does not take it away from all foil riders who want a lightweight board filled to the brim with top-end performance characters to travel with.</p> <p>The Dwarfcraft 3’6” is already a minimalist setup, but after experimenting with a thinner version, Slingshot's testers and team riders told them it was lighter, more responsive and gives them a more direct, connected feel to the foil and the water. At the advanced level, the decrease in weight and distance between feet and foil makes a noticeable difference in feel and performance and is just another tweak that helps take the sport to new heights.</p> <p><strong>Features:</strong></p> <ul> <li>Low-profile skate-style shape for advanced foil performance</li> <li>A thinner, lighter version of Dwarf Craft 3’6”</li> <li>Concaved deck for agile handling w/ subtle movements</li> <li>Compact for easy travel & transport</li> <li>Lightweight, low profile, durable construction</li> <li>Full-length deck pad for grip & cushion</li> </ul> <h3><strong>Package Includes:</strong></h3> <ul> <li>Dwarf Craft Micro 3'6"</li> <li>Board</li> <li>Pedestal foil mounting hardware</li> </ul>
<h2><strong>Take a look at the Slingshot Dwarf Craft Foil Board with S2AS!</strong></h2> <p>For the rider that has learnt on a longer, higher volume setup and are ready for a new challenge then the compact freeride Dwarf Craft is for you.</p> <p>Taking the step up to this board is best suited to people who have already been working on their footwork, and want a board that is ready for liftoff as soon as it touches the water, then this board is for you. With its bevelled rails which help with an early release from the water, which makes a big difference when you are leaning over into your latest carve or pulling hard upwind. Bevelled rails are designed to prevent the board from grabbing the water when the board touches down, which prevents you from grinding to a halt in the water.</p> <p>Couple the bevelled rails with the concave deck of the Dwarf Craft you really do have a board at the top of it's game.</p> <h3><strong>Features:</strong></h3> <ul> <li>NEW Cushy corduroy deck pad</li> <li>NEW Foil Track position</li> <li>NEW Footstrap inserts</li> <li>Compact, playful, progressive freeride foil board</li> <li>If you’re bored with your bigger board, this is your answer</li> <li>Short and stout, great for jumping</li> <li>Travel-friendly size</li> <li>Concave deck increases turning response, helps with foot position</li> </ul> <h3><strong>Package Includes:</strong></h3> <ul> <li>Dwarf Craft 3'6" board</li> <li>Pedestal foil mounting hardware</li> </ul>
<h2><strong>Take a look at the Slingshot Hypermiler 4'8" Foilboard with S2AS!</strong></h2> <p>The Hypermiler is a lightweight carbon board which is built for speed, distance, boosting and offers aggressive edging.</p> <p>If you are into open water, big distances and fully engaged angles then this race caliver board is for you! The board is lightweight, it has a textured deck which increases grip whilst reducing even more weight. The rails of the board are aggressive, which is great for extreme carving and upwind angles.</p> <h3><strong>Features:</strong></h3> <ul> <li>An advanced board for high-performance foilers</li> <li>Multiple footstrap Insert Positions - Ride with 3 straps, 2 straps, 1 strap, half straps or no straps</li> <li>Lightweight carbon construction</li> <li>Textured deck increases grip, reduces weight</li> <li>Race-calibre design great for distance and advanced freeriding</li> <li>Aggressively bevelled rails allow for extreme carving and angles</li> </ul> <h3><strong>Package Includes:</strong></h3> <ul> <li>Hypermiler 4'8" board</li> <li>Foil pedestal mounting hardware</li> </ul>
<h2><strong>Take a look at the Slingshot Alien Air 4'8" with S2AS!</strong></h2> <p>The Slingshots answer to a zero-to-hero foil board which is designed to make the learning curve for the masses as easy and fun as possible. This is the largest foilboard in the Slingshot line in both physical size and volume. The Alien Air offers a stable and forgiving setup, meaning a user-friendly, casual cruising, easy progression board.</p> <p>The Alien Air has had an update for this model, with a thinner profile, narrower belly and slightly less volume than previous models. These changes make it easier for water starts, and is lighter and less bulky which means manoeuvring in the water is a lot easier. It is also is a great board for crossing over to surf and wake foiling.</p> <h3><strong>Features:</strong></h3> <ul> <li>NEW shape: Thinner, lighter, less bulky</li> <li>NEW Cushy corduroy deck pad</li> <li>Our legacy board for user-friendly freeride foiling</li> <li>Volume, width and scooped nose = easy takeoffs, less crashing, touch-and-go performance</li> <li>Lots of room to walk around, great for transitions</li> <li>Great crossover shape for surf foiling</li> </ul> <h3><strong>Package Includes:</strong></h3> <ul> <li>Alien Air 4'8" Board</li> <li>Foil pedestal mounting hardware</li> </ul>
<h2><strong>Take a look at the Slingshot Converter 5'4" at S2AS!</strong></h2> <p>Can't decide between a surfboard or foilboard? Well, let us make that decision easy for you, introducing the Slingshot Crossover 5'4. Equipped with thruster FCS|| fin boxes and an adjustable foil mount. This board is a no brainer for anyone travelling, or simply wants a board that will do both!</p> <p>The Converter is a one-board-quiver that lets you switch between kitesurfing and foiling in a matter of seconds. This is the ultimate travel companion when you want the ability to surf some sessions and foil others, but travelling with separate boards is out of the question. For kitesurfing, the Converter is a proven shape that riders love for its all-around versatility; for foiling, riders appreciate the familiar feel they get from a surfboard shape instead of a dedicated foil board.</p> <h3><strong>Package Includes:</strong></h3> <ul> <li>Converter 5'4" Board</li> <li>Foil pedestal mounting hardware</li> <li>3 x FCS ||Fins</li> </ul>
<h2><strong>Take a look at the Slingshot Simulator 5'6" with S2AS!</strong></h2> <p>The Slingshot Simulator is a larger, friendlier soft top board designed to make the journey into foiling as easy and painless as possible. Whether you are learning foiling yourself or teaching somebody else, or whether you're just a casual foiler that needs a crossover set up for surf or behind the boat. The Simulator features a leash plug which allows easy crossover to the surf. With a larger outline and additional buoyancy, the Simulator is a great user friendly progressive board.</p> <h3><strong>Features: </strong></h3> <ul> <li>NEW Cushy corduroy deck pad covers entire deck and rails</li> <li>Larger, more buoyancy great for user-friendly progression</li> <li>Great crossover for surf and wake foiling</li> <li>Hard board with soft wrap, NOT a spongy foam board</li> <li>Ideal teaching tool for spouse, kids, friends, etc</li> </ul> <h3><strong>Package Includes:</strong></h3> <ul> <li>Simulator 5'6" Board</li> <li>Foil pedestal mounting hardware</li> </ul>
<h2><strong>Take a look at the new Shinn Jackson Sunburner Kite Foilboard at S2AS!</strong></h2> <p>Already into it’s 2nd year of production the Jackson Sunburner is still lighter, stiffer and more agile than any other ABS technology foil board on the market whilst maintaining the legendary durability and ease of use Jackson is known for. For this year we added a pocket sized 112cm that is sure to be popular with foiling aficionados.<br /> <br /> Achieving a robust snowboard style construction that’s both stiff (a critical feature for control on a foil board) and light is no easy task but our innovative V-Techmould combined with uni-directional carbonmakes significant gains in both areas. A one piece pad provides the perfect blend of comfort and sensitivity with the perfect balance between grip and durability. The Sunburner also features our unique Trim Track foil connection allowing you to tune your ride andachieve the preferred foil position in the board.<br /> <br /> Available in 3 lengths, 140cm perfect for foil beginners or heavier riders, 128cm for intermediate to advanced riders either strapped or strapless and 112cm for the more experienced riders looking for a minimalist deck with perfect travel-ability.</p> <h3><strong>Construction:</strong></h3> <p>- V Mould for Stiffness<br /> - Uni Directional Carbon Laminate<br /> - Full Wood Core<br /> - Full Deck Pad</p> <h3><strong>Shape and Accessories:</strong></h3> <p>- Flatter Rocker for Faster Take Offs<br /> - Full Nose Outline to Resist Touch Downs</p> <h3><strong>Sizing:</strong></h3> <p>- 112x45cm<br /> - 128x45cm<br /> - 140x45cm</p>
<h2><strong>Take a look at the new Shinn Model K2 Carbon Set Kite Hydrofoil at S2AS!</strong></h2><p>After more than 2 years of development and 30 different prototypes Shinn have finally released their full carbon hydrofoils!<br/><br/>Introduced last year the K2 foil introduced new levels of stability and control in a foil that was fast, easy to use and incredibly pitch stable. For this season Shinn have raised the bar once again by offering this foil with an all new Carbon composite mast. Not happy to simply produce a "black" foil Shinn Kiteboarding needed every to work in perfect harmony, carbon foils offer so much more stiffness (at a lighter weight) than their aluminium counterparts. During foiling the rider is up to 1 metre above the foil, it’s long distance control, 1cm of flex at wing level is magnified by a factor of X to where you stand – imagine trying to push a button with a 1m long flexible stick or driving a car with flat tyres, each control input you make is magnified and delayed causing instability and even the most talented riders to wobble. If your serious about foiling and want to raise your game to the next level carbon is the only way forwards.<br/><br/>Ride further and faster without extreme front foot pressure, agility with stability and a fast track to a more advanced foiling level. With a similar rake and surface area to the model K the secret to this foil is in the combination of the 2-stage anhedral front wing and high aspect, wingletted stabiliser perfectly balancing the foil through a range of speeds. Built using proprietary hi-modulus, multi-axial carbon sandwich construction and featuring an innovative new Hollow-Tech integrated mounting plate with fast mount slide on/off fasteners. This foil uses a dedicated fuselage but is compatible with all existing Shinn wings and stabilisers.<br/><br/>People often ask us at S2AS if it makes sense to have a carbon foil mast and our answer is always "unless you want to spend the money don’t test one as once you try one you will never go back!"</p><h3><strong>Features: </strong></h3><p>- Revolutionary Freeride Foil: Designed for riders wanting to take their foiling to the next level – quickly.<br/>- Hi-Modulus Carbon Wings: Medium/high aspect wing - 866 cm 2 with winglet Stabiliser - 280cm2<br/>- ST3W Carbon Stabiliser with yaw control winglets<br/>- Versatile Speed range: Take off around 12 kph with top speeds >55 kph<br/>- Multiple Mast Lengths: Available with 60cm, 75cm, 90cm and 110cm<br/>- Hollow-Tech Mounting plate: This integrated plate Increases rigidity and decreases weight<br/>- Multi-axial, multi layered, hi-modulus carbon construction: Increased speed, increased stiffness and increased control<br/>- Compatible and Easy: Fast and easy foil attachment to any board (165 x 90 bolt spacings) with either M6 or M8 hardware<br/>- H4Modular Design: Fuselage compatibility with all other Shinn wings and stabilisers<br/><br/></p>
<h2><strong>Take a look at the new Shinn Model Mega K Carbon Set Kite Hydrofoil at S2AS!</strong></h2><p>The Mega K is the most versatile wing in the Shinn range.<br/><br/>Originally designed with Surf and SUP in mind it’s also proved to be exceptionally well suited to kite-foiling in waves and in extreme light winds. With a surprisingly high top speed for a wing of this size and yet still un-believable low speed starting (as low as 8 kph) the Mega K leads us down the path of multi-discipline wings. This season sees a massive performance increase thanks to our new hi-modulus carbon S20.1 stabiliser. Taking on board the lessons learnt during the development of the K2 foil this new stabiliser improves on speed range and pitch stability whilst carving like you can’t believe.<br/><br/>By offering the Model Mega K with Carbon composite mast Shinn have made incredible improvements. Not happy to simply produce a "black" foil Shinn Kiteboarding needed every to work in perfect harmony, carbon foils offer so much more stiffness (at a lighter weight) than their aluminium counterparts. During foiling the rider is up to 1 metre above the foil, it’s long distance control, 1cm of flex at wing level is magnified by a factor of X to where you stand – imagine trying to push a button with a 1m long flexible stick or driving a car with flat tyres, each control input you make is magnified and delayed causing instability and even the most talented riders to wobble. If your serious about foiling and want to raise your game to the next level carbon is the only way forwards.<br/><br/>Designed to provide lift at low speeds and yet retain enough top end to keep it fun the Mega K provides stability and manoeuvrability making it perfect for SUP, SURF or Kitewave foiling in small to medium sized waves. Utilizing a low to mid aspect ratio wing with a high rake delta outline has allowed us to provide the massive speed range needed to handle both starting and control on the wave face. The main wings blended winglets work with the flat stabiliser to give great directional stability without limiting the carving potential even at crazy slow speeds. Built using proprietary hi-modulus, multi-axial carbon sandwich construction and featuring an innovative new Hollow-Tech integrated mounting plate with fast mount slide on/off fasteners. This foil uses a dedicated fuselage but is compatible with all existing Shinn wings and stabilisers.<br/><br/>So why do we recommend the Mega K for extreme light wind kiting as well? Low speed starting is the key where the challenge is to generate enough speed to start foiling. With the Mega K the power needed to water start is already enough to fly and with a top speed in excess of 35 kph you’ll be cruising when even other foilers are left sitting on the beach.<br/><br/>People often ask us at S2AS if it makes sense to have a carbon foil mast and our answer is always "unless you want to spend the money don’t test one as once you try one you will never go back!"</p><h3><strong>Features: </strong></h3><p>- Versatile and Multi-functional: Strapless, Waves, Transitions and Extreme Light Wind<br/>- Hi-Modulus Carbon Wings: Medium/low aspect wing - 1200 cm 2 with down-turned winglet Stabiliser – S20.1<br/>- Amazing Speed Range: Take off around 8kph with top speeds >40 kph<br/>- Multiple Mast Lengths: Available with 60cm, 75cm, 90cm and 110cm<br/>- Hollow-Tech Mounting plate: This integrated plate Increases rigidity and decreases weight<br/>- Multi-axial, multi layered, hi-modulus carbon construction: Increased speed, increased stiffness and increased control<br/>- Compatible and Easy: Fast and easy foil attachment to any board (165 x 90 bolt spacings) with either M6 or M8 hardware<br/>- Modular Design: Fuselage compatibility with all other Shinn wings and stabilisers<br/>- Fast and Versatile Carbon Hydrofoil : Faster, Stiffer, More Stable<br/></p>
<h2><strong>Take a look at the new Airush Freeride V2 Kite Hydrofoil at S2AS!</strong></h2><p> The Airush Freeride Foil features a new generation low drag monocoque design that offers incredible stiffness, and high-speed performance without losing the ease of use for intermediate riders. The intermediate aspect ratio 800cm2 front wing features new generation profiles for higher speed. At speed the longer mast gives you more time to react, and additional clearance for the rear wing.<br/><br/>The Modular Foil Platform considers the evolution in foiling to allow riders to customize their setup. From the very first ride and lower speed performance to the most technical riding abilities with longer masts and higher speed wings, the Modular Foil Platform is designed to meet the needs of riders at every level.</p><h3><strong>Features:</strong></h3><p>- Aluminium Mast: Having five optional mast lengths, the Airush foil range is suited to a larger variety of users in most conditions.<br/>- Streamlined Connection Plate: Minimizes any drag when you get going or touch down, while creating a solid connection to the mast.<br/>- Micro Trim Ajustment w/ Open Ends: The 12mm slots enable micro trim adjustment not being used in a track system, while the open ends make the plate much quicker and easier to fit, when being used in a track system.<br/>- Anhedral Front Wing: With horizontal tips, creates stability, specifically when carving, by preventing side slipping and improved ventilation correction.<br/>- Ultra-Low Drag Monocoque: Featuring a new generation of monocoque design, the Freeride Foil is the ideal preset, high-speed performance foil.<br/>- Double Bolt Connection Top & Bottom: Located on the top and bottom of the mast work in conjunction with the chamfered slot connection for a bombproof connection while enabling a quick switch out between mast options.</p><h3><strong>Sizing:</strong></h3><p>- Mast: 95cm<br/>- Front Wing: 800cm2<br/>- Rear Wing: 260cm2</p>
<h2><strong>Take a look at the new Airush Carving V2 Kite Hydrofoil at S2AS!</strong></h2><p>Designed to take you from your first steps in foiling to advanced carving. The Airush Carving Foil features a high stability 1000cm2 Carving front wing, for the perfect balance of performance and ease of use. The larger wing provides lift at a lower speed, while the intermediate mast length creates a very stable platform for the entry-level rider, or an advanced rider looking for more maneuver oriented ridin<br/><br/>The Modular Foil Platform considers the evolution in foiling to allow riders to customize their setup. From the very first ride and lower speed performance to the most technical riding abilities with longer masts and higher speed wings, the Modular Foil Platform is designed to meet the needs of riders at every level.</p><h3><strong>Features:</strong></h3><p>- Aluminium Mast: Having five optional mast lengths, the Airush foil range is suited to a larger variety of users in most conditions.<br/>- Streamlined Connection Plate: Minimizes any drag when you get going or touch down, while creating a solid connection to the mast.<br/>- Micro Trim Ajustment w/ Open Ends: The 12mm slots enable micro trim adjustment not being used in a track system, while the open ends make the plate much quicker and easier to fit, when being used in a track system.<br/>- Anhedral Front Wing: With horizontal tips, creates stability, specifically when carving, by preventing side slipping and improved ventilation correction.<br/>- Stealth Fuselage: Minimizes drag while maximizing stiffness, while the flow dynamics minimize any oscillation you would find in a round fuselage, resulting in increased stability.<br/>- Trimmable Rear Wing: Allows the trim angle to be quickly adjusted to compensate for the lift requirements for different rider levels, personal preference, and when using different wing configurations.<br/>- Double Bolt Connection Top & Bottom: Located on the top and bottom of the mast work in conjunction with the chamfered slot connection for a bombproof connection while enabling a quick switch out between mast options.</p><h3><strong>Sizing:</strong></h3><p>- Mast: 80cm<br/>- Front Wing: 1000cm2<br/>- Rear Wing: 260cm2</p>
<h2><strong>Take a look at the new Airush Team Foil Board at S2AS!</strong></h2><p>If you’re looking for a compact carbon solution, the Team Foilboard is an extremely fun and skatey board for advanced freeride users riding strapped or strapless. The refinedbottom shape features bevel rails in the tail with a release edge merging to the convex nose bottom shape for soft touch downs at any angle. Configuration for footstraps can be set as a three-strap setup with offset front straps or with a single front strap.<br/><br/>This lightweight performance foil-specific construction is achieved by CNC cutting a medium weight EPS core and sandwiching it with bamboo. Featuring a durable Carbon Innegra top deck, and stiff UD carbon fiber bottom deck with ultra light stainless foil inserts.</p><h3><strong>Features:</strong></h3><p>- Carbon Innegra top deck & biaxial carbon bottom.<br/>- Tough sandwich layer top deck & bottom.<br/>- Unpainted rail for increased durability.</p><h3><strong>Sizing:</strong></h3><p>- 3’11” (121cm) x 18.1” (46cm) x 1.9” (4.9cm)<br/>- 14.5L</p>
<h2><strong>Take a look at the new Airush Foil Skate Board at S2AS!</strong></h2><p>The Foil Skate offers a twintip style construction to foil riders. When compared to higher volume foil boards, the Foil Skate is easy to launch as the board sits lower in the water, specifically if you are used to riding twintips. The stiff wood core creates a very stable ride and is extremely durable. The Foil Skate includes low drag foil inserts, and optional fin connections opening up the option of traditional skate style directional riding without the foil.<br/><br/>The AR Glass layup is focused on durability and responsiveness, ensuring a perfect combination for all carving and freeride foiling needs. This construction is simple yet effective for smooth, easy, and forgiving riding.</p><h3><strong>Features:</strong></h3><p>- Lightweight durable top sheet.<br/>- Midweight triaxial fiberglass.<br/>- Scratch resistant bottom sheet.<br/><br/></p><h3><strong>Sizing:</strong></h3><p>- 121x46cm<br/>- 142x48cm</p>
<h2><strong>Take a look at the new Airush Mini Monster Convert V3 Kite Surf/Foil Board at S2AS!</strong></h2><p>Featuring the unique Airush low drag foil insert, the Mini Monster Convert is the perfect board for foiling, smaller waves, lighter wind or flat-water riding. With well-distributed volume throughout the board and a performance rail, early planing and sub-planing performance are easily achieved, while maintaining incredible turning and carving abilities. The stainless-steel inserts create minimal drag when the board is not being used in foil configuration, while still enabling a simple mounting process for foil use.<br/><br/>The Reflex Bamboo combines progressive flex in a durable sandwich construction. The stringerless medium density core with high flex top deck and longitudinally oriented bottom deck is combined with a UD Flax rail for improved impact resistance</p><h3><strong>Features:</strong></h3><p>- Progressive flex bamboo sandwich top deck.<br/>- Longitudinally oriented bamboo bottom deck.<br/>- UD Flax rail - impact resistant parabolic rail stringer.</p><h3><strong>Sizing:</strong></h3><p>- 4'10" (147cm) x 19" (48.3cm) x 2.4" (6.1cm) - 24.5L<br/>- 5'2" (157cm) x 19.5" (49.5cm) x 2.45" (6.2cm) - 27.5L<br/>- 5'6" (168cm) x 20" (50.8cm) x 2.65" (6.7cm) - 33.5L<br/>- 5'10" (178cm) x 20.5" (52cm) x 2.75" (7cm) - 38.5L</p>
<h2><strong>Take a look at the new 2019 Cabrinha HI:Rise Lift Hydrofoil no at S2AS!</strong></h2> <p>The HI:Rise Lift is a diverse foiling wing built to take anyone from their first few steps to progressive wave and freeriding! All thanks to its low aspect ratio, low planing profile section and moderately swept outline.</p> <p>The lower aspect, high lifting wing which is perfect for many things. For starters, it is a great way to introduce yourself to hydrofoiling with its easy and stable lifting platform. With its ability to lift at low speeds, the Hi-Rise Lift is also the ideal choice for riders looking to foil board in the surf.</p> <p><strong>*Compatible Boards: X:Breed Foil and Double Agent</strong></p> <p><em>This Set includes: m8x25mm (4pcs), m8x27mm(2pcs), m8x40mm (4pcs), m8x14mm (2pcs), allen key (5mm), top socket, mast, fuselage, grease, wing protector (4pcs) and foam insert </em></p> <h3><strong>Mast Features:</strong></h3> <p><strong>Versatile Top Socket:</strong> With indicator for use on both tracks and 4-point connection</p> <p><strong>650mm Extended Fuselage: </strong>Now 20% lighter with improved stability and hydrodynamics</p> <p><strong>Aircraft Grade:</strong> Extruded, anodized 6061-T6 aluminium mast and fuselage</p> <p><strong>Watertight Extrusion:</strong> For improved floatation and minimal weight</p> <p><strong>Titanium coated hardware and grease included</strong></p> <h3><strong>Wing Features</strong></h3> <p><strong>A-Grade Paulownia:</strong> Veneer wood core with unmatched strength/weight ratio </p> <p><strong>Front wing: </strong>Volcanic triple layer Basalt fiber construction </p> <p><strong>Rear Wing:</strong> Forged composite construction</p> <p><strong>ABS insert reinforcements</strong></p> <p><strong>Polymer Wing Perimeter: </strong>A durable cast</p>
<h2><strong>Take a look at the new 2019 Cabrinha HI:Rise Speed Hydrofoil now at S2AS!</strong></h2> <p>The HI:Rise Speed is specifically designed for riders who like to ride fast with a versatile and stable wing set.</p> <p>The Hi:Rise Speed wing set is an all-new moderate aspect wing from Cabrinha with a faster profile made for... speed. This wing set is designed for speed and stability when freeriding and stops just short of being a full blown racing wing. That being said, hold on because this wing will go as fast as you want to ride. Built with a medium aspect ratio, efficient profile section and elliptical straight outline and progressive anhedral with winglets, this hydrofoil performs exactly as it promises!</p> <p><strong>*Compatible Boards: X:Breed Foil and Double Agent</strong></p> <p><em>This set includes: m8x25mm (4pcs), m8x27mm(2pcs), m8x40mm (4pcs), m8x14mm (2pcs), allen key (5mm), Top socket, mast, fuselage, grease, wing protector (4pcs) and foam insert </em></p> <h3><strong>Mast Features:</strong></h3> <p><strong>Versatile Top Socket:</strong> With indicator for use on both tracks and 4-point connection</p> <p><strong>650mm Extended Fuselage: </strong>Now 20% lighter with improved stability and hydrodynamics</p> <p><strong>Aircraft Grade:</strong> Extruded, anodized 6061-T6 aluminium mast and fuselage</p> <p><strong>Watertight Extrusion:</strong> For improved floatation and minimal weight</p> <p><strong>Titanium coated hardware and grease included</strong></p> <h3><strong>Wing Features</strong></h3> <p><strong>A-Grade Paulownia:</strong> Veneer wood core with unmatched strength/weight ratio </p> <p><strong>Front wing: </strong>Double layer carbon fibre construction</p> <p><strong>Rear Wing:</strong> Double layer carbon fibre construction</p> <p><strong>ABS insert reinforcements</strong></p> <p><strong>Polymer Wing Perimeter: </strong>A durable cast</p>
<h3><strong>Take a look at the new 2019 Cabrinha Double Agent Kitesurfing Hydrofoil Board at S2AS!</strong></h3> <p>One board. Two uses. A performance hydrofoil board that’s incredibly easy to ride. Quickly converts into a fun surf skate.</p> <p>The Double Agent crosses seamlessly between surf skating and hydrofoiling. With the expanded range of Cabrinha's all new foil wings, masts and fuselage, the Double Agent just became much more customizable to your riding preference.</p> <p>The Double Agent is a wood constructed surf skate shape that doubles as the perfect deck to mount to the new Hi-Rise hydrofoil system.</p> <p><em>Included with the board: 2x 30mm fins, 2x 50mm fins, 8x 6x25mm screws</em></p> <h3><strong>Technologies:</strong></h3> <p><strong>Single concave to angled v-tail channels: </strong>Provides exceptional grip</p> <p><strong>Fully Customisable: </strong>Strapless, 2 or 3 strap configuration</p> <p><strong>Full EVA Deckpad:</strong> Thick & comfortable</p> <p><strong>TT quad fins:</strong> For surfskate/wakesurf use</p> <p><strong>Fully compatible with the modular HI</strong><strong>:Rise</strong><strong> Foil System</strong></p>
<h2><strong>Take a look at the new 2019 Cabrinha X:Breed Foil Kitesurfing Hydrofoil Board at S2AS!</strong></h2> <p>The all-new X:Breed Foil crosses seamlessly between surf and freestyle with the added ability to attach a hydrofoil.</p> <p>The X:Breed Foil slips nicely into Cabrinha's surf range by offering solid surfing performance and exceptional freestyle abilities. Letting you flex your versatility muscles any time you please. The twin nose and tail shape draw a straighter rail line than a board of the same size. This means that the board has the feeling of a longer board in a shorter, more compact package.</p> <p>What makes the X:Breed Foil really unique is its ability to attach any Cabrinha Hi-Rise hydrofoil to it. The X:Breed Foil really opens the door to the exciting and fast growing world of foilboarding.</p> <p><em>This set includes: 3 RTM hybrid bamboo/soric fins, front and rear deck pad and foil mounting hardware.</em></p> <h3><strong>Features:</strong></h3> <ul> <li><strong>Twintip Thruster Design</strong></li> <li><strong>Straighter Rail: </strong>Produces great pop</li> <li><strong>Excellent for strapless tricks</strong></li> <li><strong>Incredibly lively under your feet</strong></li> <li><strong>Fully compatible with the modular HI</strong><strong>:Rise</strong><strong> Foil System</strong></li> </ul> <h3><strong>Sizing:</strong></h3> <ul> <li>5’1” x 18” x 2” - 20.4L</li> <li>5’3” x 18.5” x 2.04” - 21.6L</li> <li>5'5" x 19.07" x 2.07" x 23.9L</li> </ul>
<h2><strong>Take a look at the 2019 Moses T22 Hydrofoil Board now available at S2AS!</strong></h2> <p>Only 109x43.5cm, a short board that takes advantage of its compact design. The Moses T22 Hydrofoil Board delivers max control in any situation: strapless freestyle, wave riding, pumping or simple cruising, everything is possible with the new T22. Its size makes this board ideal for travel. Designed for medium to expert riders, T22 has a perfect balance </p> <p>With a 2.2cm this board thickness this board is super lightweight with a fast responsiveness that gives the rider an even direct control of the foil. Carbon reinforcement provides a durable construction and keeps the weight down at 1.9kg</p> <h3><strong>Features:</strong></h3> <ul> <li>Low-profile skate-style shape </li> <li>Super light only 1.9 kilo</li> <li>Flat deck </li> <li>Extremely compact for travel and transport</li> <li>Low profile, durable construction, carbon reinforced</li> <li>Full-length deck pad for grip & cushion</li> <li>2 front straps</li> </ul> <h3><strong>Dimensions:</strong></h3> <ul> <li>109x43.5x2.2cm</li> <li>1.9kg</li> </ul>
<h2><strong>Take a look at the 2019 Moses T22 Carbon Ltd Hydrofoil Board now available at S2AS!</strong></h2> <p>Only 109x43.5cm, a short board that takes advantage of its compact design. The Moses T22 Hydrofoil Board delivers max control in any situation: strapless freestyle, wave riding, pumping or simple cruising, everything is possible with the new T22. Its size makes this board ideal for travel. Designed for medium to expert riders, T22 has a perfect balance </p> <p>With a 2.2cm this board thickness this board is super lightweight with a fast responsiveness that gives the rider an even direct control of the foil. </p> <h3><strong>Features:</strong></h3> <ul> <li>Low-profile skate-style shape </li> <li>Flat deck </li> <li>Extremely compact for travel and transport</li> <li>Low profile, durable construction, carbon reinforced</li> <li>Full-length deck pad for grip & cushion</li> </ul> <h3><strong>Dimensions:</strong></h3> <ul> <li>109x43.5x2.2cm</li> <li>2kg</li> </ul>
<h2><strong>Take a look at the 2019 Moses T38 Hydrofoil Board now available at S2AS!</strong></h2> <p>The T38 is a compact board, extremely light at only 2.7kg. A carbon board with dual plate position and 5 hole straps to fit all Moses wings in the line. This pocket board reduces the momentum making it ideal for freestyle.</p> <p>Despite its dimensions, the T38 is easy to use and accessible to riders of any level. While using strapless, its bevelled rails and low volume will permit you to sink the edge of the board for easy starts and the lightweight will give you a great advantage in manoeuvres reducing the momentum and drag. </p> <p>Double drilling to allow double mast positions, for kitesurf or surf.</p> <h3><strong>Features:</strong></h3> <ul> <li>Flat deck </li> <li>Compact for travel and transport</li> <li>Low profile, durable construction, carbon reinforced</li> <li>Full-length deck pad for grip & cushion</li> <li>3x Moses Footstraps</li> </ul> <h3><strong>Dimensions:</strong></h3> <ul> <li>125x45x3.8cm</li> <li>2.7kg</li> </ul>
<h2><strong>Take a look at the 2019 Moses T38 Carbon Hydrofoil Board now available at S2AS!</strong></h2> <p>The T38 is a compact board, extremely light at only 2.2kg. A carbon board with dual plate position and 5 hole straps to fit all Moses wings in the line. This pocket board reduces the momentum making it ideal for freestyle.</p> <p>Despite its dimensions, the T38 is easy to use and accessible to riders of any level. While using strapless, its bevelled rails and low volume will permit you to sink the edge of the board for easy starts and the lightweight will give you a great advantage in manoeuvres reducing the momentum and drag. </p> <p>Double drilling to allow double mast positions, for kitesurf or surf.</p> <h3><strong>Features:</strong></h3> <ul> <li>Flat deck </li> <li>Compact for travel and transport</li> <li>Low profile, durable construction, carbon reinforced</li> <li>Full-length deck pad for grip & cushion</li> <li>3 Moses Footstraps</li> </ul> <h3><strong>Dimensions:</strong></h3> <ul> <li>125x45x3.8cm</li> <li>2.2kg</li> </ul>
<h2><strong>Take a look at the </strong><strong>2019 Moses Short 71 SW Hydrofoil now at S2AS!</strong></h2> <p>The entry level foil series from Moses, the Short 71 SW is an all-around foil ideal for beginners, schools and shallow water spots!</p> <p>The mast is a full carbon structure, 18 carbon layers of different weight and fabrics are combined to create a shape and profile are optimized to deliver the best possible performance and reduce the ventilation.</p> <p>An accessible wing (548mm "HL Freestyle") that offers a good amount of lift. Shaped specifically to improve the ease of use and versatility, this entry freeride wing offers a smooth foiling experience for early planing and stability.</p> <p>A thicker profile and medium winglet for the 330 Stabilizer "All Round", produces great stability at high speeds. More drive for your long run sessions but still plenty of manoeuvrability for carving at any speed. The 330 gives your front wing even more power.</p> <p>Moses' Italian carbon designer has over 50 years of expertise working in the world of carbon fiber and composite materials which assures the quality of there construction of hydrofoils.</p> <h3><strong>Product Contents:</strong></h3> <ul> <li>Mast Short 71</li> <li>Kite Stabilizer 330mm "All Round"</li> <li>Kite Front Wing 548mm "HL Freestyle"</li> <li>Fuselage Kite 680</li> <li>4x Bushing M6x10mm</li> <li>2x Socket head cap ScrewM6x20mm</li> <li>3x Flat Head Screw M6x20mm</li> <li>2x Flat Head Screw M6x16mm</li> </ul>
<h2><strong>Take a look at the 2019 Moses Onda Kite 91 Hydrofoil now at S2AS!</strong></h2> <p>Moses' largest low aspect kite foil wing will take your foiling experience to a new playful level. The 5 to 25 knots speed range says it all. Large surface, unique inverted gull wing design, and concave bottom will allow you to ride at walk speed with plenty of stability and control while keeping an incredible top end speed and carving ability even with the smallest radius turns</p> <p>The Fluente 91 mast is a full carbon structure, 18 carbon layers of different weight and fabrics are combined to create a shape and profile are optimized to deliver the best possible performance and reduce the ventilation.</p> <p>Built with Moses' new "Magic Wing", This reverse gullwing design with its 25 cm of cord has a huge amount of lift. Extreme control even in white waters, the Surf Front Wing 633mm "HL Freestyle" has an amazing 22/24 knots top end speed while able to foil at walk speed</p> <p>The Stabilizer 483mm was created to give freedom and speed to the big front wings 633 and 683. The downward tips are there to help to reduce the turn radius while keeping the enter speed and release energy while pumping.</p> <p>Lastly, the Surf Fuselage 710 uses a specific manganese aluminium alloy for its significant strength and excellent corrosion resistance. The shape itself is designed to minimize hydraulic structure resistance and increase performance for surf and sup applications</p> <p>Moses' Italian carbon designer has over 50 years of expertise working in the world of carbon fiber and composite materials which assures the quality of there construction of hydrofoils.</p> <h3><strong>Product Contents:</strong></h3> <ul> <li>Fluente 91 Mast</li> <li>Stabilizer 483mm</li> <li>Surf Front Wing 633mm "HL Freestyle"</li> <li>Surf Fuselage 710</li> <li>4x Bushing M6x10mm</li> <li>2x Socket head cap ScrewM6x20mm</li> <li>3x Flat Head Screw M6x20mm</li> <li>2x Flat Head Screw M6x16mm</li> </ul>
<h2><strong>Take a look at the 2019 Moses Fl</strong><strong>uente</strong><strong> 91 Easy Hydrofoil now at S2AS!</strong></h2> <p>Progressive and performing, the Fluente 91 E is a super accessible freeride foil, plenty of lift for early take off, extremely easy to control, this hydrofoil offers a smooth take off and amazing stability. With its wide range of use and intuitive ride, it will allow you to discover the magic of foiling. </p> <p>The Fluente 91 mast is a full carbon structure, 18 carbon layers of different weight and fabrics are combined to create a shape and profile are optimized to deliver the best possible performance and reduce the ventilation.</p> <p>Built with the Moses' Front Wing 590mm "Cruising" that is so easy that can be used by any beginner rider and still able to deliver control at high speed, thanks to its wider cord and a thicker profile.</p> <p>The Kite Stabilizer 330mm "All Round" is fantastic if your goal is to stabilize your foil at high speed. More drive for your long run sessions but still plenty of mmanoeuvrability for carving at any speed. The 330mm gives your front wing more power</p> <p>Lastly, the Fuselage Kite 647 uses a specific manganese aluminium alloy for its significant strength and excellent corrosion resistance. The shape itself is designed to minimize hydraulic structure resistance and increase performance for surf and sup applications</p> <p>Moses' Italian carbon designer has over 50 years of expertise working in the world of carbon fiber and composite materials which assures the quality of there construction of hydrofoils.</p> <h3><strong>Product Contents:</strong></h3> <ul> <li>Fluente 91 Mast</li> <li>Front Wing 590mm "Cruising"</li> <li>Kite Stabilizer 330mm "All Round"</li> <li>Fuselage Kite 647</li> <li>4x Bushing M6x10mm </li> <li>2x Socket head cap Screw M6x20mm</li> <li>3x Flat Head Screw M6x20mm</li> <li>2x Flat Head Screw M6x16mm</li> </ul>
<h2><strong>Take a look at the 2019 Moses Fl</strong><strong>uente</strong><strong> 91 AR Hydrofoil now at S2AS!</strong></h2> <p>A True Freestyle/Wave Foil, the Fluente 91 "All Round" was developed by Moses pro-team to be a medium aspect foil that delivers the perfect balance between speed and manoeuvrability. Whether you are riding strapless, cruising the coastline or shredding waves, it can do it all. Lightweight, fast and stable. So whether you are just learning or already a pro, you’ll find it rewarding to ride. </p> <p>The Fluente 91 mast is a full carbon structure, 18 carbon layers of different weight and fabrics are combined to create a shape and profile are optimized to deliver the best possible performance and reduce the ventilation.</p> <p>Built with the Moses' Kite Front Wing 550mm "Freestyle" is the choice for all those light/medium weight riders aiming to do manoeuvres at high speeds. Jibes, tacks, 360, all kind of tricks are possible with this wing.</p> <p>The Kite Stabilizer 325mm "Freestyle" provides less drive for long distance runs and more manoeuvrability for multiple turns in a swimming-pool space.</p> <p>Lastly, the Fuselage Kite 647 uses a specific manganese aluminium alloy for its significant strength and excellent corrosion resistance. The shape itself is designed to minimize hydraulic structure resistance and increase performance for surf and sup applications</p> <p>Moses' Italian carbon designer has over 50 years of expertise working in the world of carbon fiber and composite materials which assures the quality of there construction of hydrofoils.</p> <h3><strong>Product Contents:</strong></h3> <ul> <li>Fluente 91 Mast</li> <li>Kite Front Wing 550mm "Freestyle"</li> <li>Kite Stabilizer 325mm "Freestyle"</li> <li>Fuselage Kite 647</li> <li>4x Bushing M6x10mm </li> <li>2x Socket head cap Screw M6x20mm</li> <li>3x Flat Head Screw M6x20mm</li> <li>2x Flat Head Screw M6x16mm</li> </ul>
<h2><strong>Take a look at the 2019 Moses Vorace 101 FR Hydrofoil now at S2AS!</strong></h2> <p>Dedicated to those advanced freestylers and strapless riders. It allows an early take off with great speed range. Covering distance quickly in perfect control mode. </p> <p>The Vorace 101 mast is Moses' high modulus carbon structure consisting of 20 carbon layers of different weights and fabrics it produces the maximum strength to stiffness ratio while the shape and profile are optimized to deliver the best possible performance and reduce ventilation.</p> <p>Utilising, the Front Wing 590 mm "Cruising" all freeride needs are included in this great lift wing. The 590 is so easy that can be used by any beginner rider and still able to deliver control at high speeds.</p> <p>The Kite Stabilizer 330mm "All Round" is a thicker profile and medium winglet ideal if your goal is to stabilize your foil at high speed. More drive for your long run sessions but still plenty of manoeuvrability for carving at any speed.</p> <p>Lastly, the Fuselage Kite 647 uses a specific manganese aluminium alloy for its significant strength and excellent corrosion resistance. The shape itself is designed to minimize hydraulic structure resistance and increase performance for surf and sup applications</p> <p>Moses' Italian carbon designer has over 50 years of expertise working in the world of carbon fiber and composite materials which assures the quality of there construction of hydrofoils.</p> <h3><strong>Product Contents:</strong></h3> <ul> <li>Vorace 101 Mast</li> <li>Front Wing 590 mm "Cruising" </li> <li>Kite Stabilizer 330mm "All Round"</li> <li>Fuselage Kite 647</li> <li>4x Bushing M6x10mm </li> <li>2x Socket head cap Screw M6x20mm</li> <li>3x Flat Head Screw M6x20mm</li> <li>2x Flat Head Screw M6x16mm</li> </ul>
<h2><strong>Take a look at the 2019 Moses Vorace 101 GT Hydrofoil now at S2AS!</strong></h2> <p>The Gran Turismo Sport foil aimed at riders seeking a Hydrofoil that is sporty and versatile, delivering a 30 knots top end speed that is still able to foil at low speed and carving like a razor in every water surface plane</p> <p>The Vorace 101 mast is Moses' high modulus carbon structure consisting of 20 carbon layers of different weights and fabrics it produces the maximum strength to stiffness ratio while the shape and profile are optimized to deliver the best possible performance and reduce ventilation.</p> <p>Utilising, the Kite Front Wing 558mm "All Round" this GT wing is a very fast and stable at high speed with plenty of control even in choppy waters, the number one choice for those high jumps and adrenaline runs.</p> <p>The Kite Stabilizer 330mm "All Round" is a thicker profile and medium winglet ideal if your goal is to stabilize your foil at high speed. More drive for your long run sessions but still plenty of manoeuvrability for carving at any speed.</p> <p>Lastly, the Fuselage Kite 647 uses a specific manganese aluminium alloy for its significant strength and excellent corrosion resistance. The shape itself is designed to minimize hydraulic structure resistance and increase performance for surf and sup applications</p> <p>Moses' Italian carbon designer has over 50 years of expertise working in the world of carbon fiber and composite materials which assures the quality of there construction of hydrofoils.</p> <h3><strong>Product Contents:</strong></h3> <ul> <li>Vorace 101 Mast</li> <li>Kite Front Wing 558mm "All Round"</li> <li>Kite Stabilizer 330mm "All Round"</li> <li>Fuselage Kite 647</li> <li>4x Bushing M6x10mm </li> <li>2x Socket head cap Screw M6x20mm</li> <li>3x Flat Head Screw M6x20mm</li> <li>2x Flat Head Screw M6x16mm</li> </ul>
<h2><strong>Take a look at the 2019 Moses Vorace 101 R Hydrofoil now at S2AS!</strong></h2> <p>Superior speed and perfect control the Vorace 101 Race is Moses' ultimate weapon for speed cross, its high modulus 101mm mast is extremely stiff and still allows for a high heeling angle to get lift upwind while keeping high control and stability. </p> <p>The Vorace 101 mast is Moses' high modulus carbon structure consisting of 20 carbon layers of different weights and fabrics it produces the maximum strength to stiffness ratio while the shape and profile are optimized to deliver the best possible performance and reduce ventilation.</p> <p>Utilising, the high aspect ratio Kite Front Wing 637mm "Competition" with its thin section profile and light reverse gullwing design.. This wing will surprise you for its easy ride and extreme control at the highest speed, making the highest performances become accessible.</p> <p>Combined with the Kite Stabilizer 420mm "Competition" an accurate inverted downwash trailing edge helps to control the amount of lift created at high speed from the 637, the result is a very stable foil that you can trust even while pushing the limits. Perfectly matching the speed capability of the 637 wing!</p> <p>Lastly, the Fuselage Kite 647 uses a specific manganese aluminium alloy for its significant strength and excellent corrosion resistance. The shape itself is designed to minimize hydraulic structure resistance and increase performance for surf and sup applications</p> <p>Moses' Italian carbon designer has over 50 years of expertise working in the world of carbon fiber and composite materials which assures the quality of there construction of hydrofoils.</p> <h3><strong>Product Contents:</strong></h3> <ul> <li>Vorace 101 Mast</li> <li>Kite Front Wing 637mm "Competition"</li> <li>Kite Stabilizer 420mm "Competition"</li> <li>Fuselage Kite 647</li> <li>4x Bushing M6x10mm </li> <li>2x Socket head cap Screw M6x20mm</li> <li>3x Flat Head Screw M6x20mm</li> <li>2x Flat Head Screw M6x16mm</li> </ul>
<h2><strong>Take a look at the 2019 Moses Comet 111 AR Hydrofoil now at S2AS!</strong></h2> <p>Full high modulus carbon, the Moses engineers designed the Comet 111 AR with the goal of delivering the fastest performance in terms of speed, low drag and consequently upwind ability in order to provide a stable and easy control ride.</p> <p>The Comet 111 mast is Moses' high modulus carbon structure consisting of 26 carbon layers of different weights and fabrics combined to give this mast the best stiffness and possible torsion resistance.while the shape and profile are optimized to deliver the best possible performance and reduce ventilation.</p> <p>Utilising, the high aspect ratio Kite Front Wing 637mm "Competition" with its thin section profile and light reverse gullwing design.. This wing will surprise you for its easy ride and extreme control at the highest speed, making the highest performances become accessible.</p> <p>Combined with the Kite Stabilizer 420mm "Competition" an accurate inverted downwash trailing edge helps to control the amount of lift created at high speed from the 637, the result is a very stable foil that you can trust even while pushing the limits. Perfectly matching the speed capability of the 637 wing!</p> <p>Lastly, the Fuselage Kite 647 uses a specific manganese aluminium alloy for its significant strength and excellent corrosion resistance. The shape itself is designed to minimize hydraulic structure resistance and increase performance for surf and sup applications</p> <p>Moses' Italian carbon designer has over 50 years of expertise working in the world of carbon fiber and composite materials which assures the quality of there construction of hydrofoils.</p> <h3><strong>Product Contents:</strong></h3> <ul> <li>Comet 111 Mast</li> <li>Kite Front Wing 637mm "Competition"</li> <li>Kite Stabilizer 420mm "Competition"</li> <li>Fuselage Kite 647</li> <li>4x Bushing M6x10mm </li> <li>2x Socket head cap Screw M6x20mm</li> <li>3x Flat Head Screw M6x20mm</li> <li>2x Flat Head Screw M6x16mm</li> </ul>
<h2><strong>Take a look at the new Shinn K2 Kite Hydrofoil at S2AS!</strong></h2> <p>It’s 2 years since Shinn tore up the rule book and introduced the Model P, a revolution for learning to foil and now they're at it again.</p> <p>Even now there is a chasm in terms of ability needed between beginner and true performance foils, Shinn Kiteboarding aim to close that gap by introducing the Shinn K2 foil. Inheriting the ease of use, early starting and intuitive pitch control from the legendary Model P the all new K2 has an abundance of confidence inspiring stability and control that allows the rider to comfortably handle power and reach speeds that seemed impossible before.</p> <p>Ride further and faster without extreme front foot pressure, agility with stability and a fast track to a more advanced foiling level. With a similar rake and surface area to the model K the secret to this foil is in the combination of the 2-stage anhedral front wing and high aspect, wingletted stabiliser perfectly balancing the foil through a range of speeds.</p> <p>If the P wing was responsible for re-writing the rule book on entry level foiling get ready for the K2 to do the same for the next generation of high-energy freeriders. </p> <h2><strong>Features:</strong></h2> <ul> <li><strong>Hi-modulus carbon: </strong>Medium high aspect wing - 866 cm2</li> <li><strong>Hi-modulus carbon: </strong>Winglet stabiliser - 290 cm2</li> <li><strong>Versatile speed range: </strong>Take off around 12 kph with top speeds > 55 kph</li> <li><strong>Multiple mast lengths</strong>: Available with 40, 60, 75 or 90 cm mast (recommended mast is 90cm)</li> <li><strong>Strike resistant design</strong>:Top mounting for the delicate composite wings protects them from accidental bottom strikes</li> <li><strong>Quik-fit plate</strong>: Fast and easy foil attachment to any board (165 x 90 bolt spacings)</li> <li><strong>Deep socket M6/M8 compatible plate</strong>: Deep socket for extra stiffness you can use this foil with m8 or m6 mounting hardware</li> <li><strong>Modular design</strong>: Fuselage compatibility with all other shinn wings and stabilisers</li> </ul>
<h2><strong>Now available the new Shinn Model P Kitesurf Hydrofoil at S2AS</strong></h2> <p>A sport limited to the rider elite only 2 years ago foil-boarding has come of age as riders of all ages and abilities look to take advantage of its benefits.</p> <p>When asking riders about their reluctance to foil the answer is always the same – it’s too difficult and too dangerous, well we have news for you – the Shinn Model P has changed all that and continues to lead the way in unbelievably safe and easy progress right from day one. Imagine making flying runs during your first 30 minutes with a foil… An impossible dream only 18 months past the Shinn Model P has bought foil-boarding within the reach of any competent TT rider and eliminated the frustrating and painful learning process of only a few short years ago. It’s not just the extreme low speed lift (starting for as little as 10 kph) that makes it so easy but also the predictable and progressive pitch control that eliminates the “rise and crash” scenes previously synonymous with learning to foil and for this season Shinn kiteboarding have added the new larger ST3 stabiliser making it even easier than before.</p> <p>Available with a wide variety of mast lengths for progression at all levels (40, 60, 75 and 90 cm) you can also be sure your investment is not short lived as the foil structure features full modular compatibility with all other wings and stabilisers in the Shinn range allowing fast and cost-effective performance upgrades if and when you are ready for more. </p> <h3><strong>Features:</strong></h3> <p><strong>Carbon Re-enforced Wing</strong><br /> 1150cm² gives amazing low speed lift and pitch control for in-experienced foilers</p> <p><strong>New for 2018 ST3 G10 Stabiliser</strong><br /> New larger stabiliser (280cm²) makes pitch control even easier than before</p> <p><strong>Low Speed Lift, High Angle of Attack Stall</strong><br /> The P wing lifts progressively and gives plenty of warning before stalling and dropping you from the sky</p> <p><strong>Multiple Mast Lengths Range</strong><br /> A mast for every learning stage with 40, 60, 75 and 90 cm lengths available</p> <p><strong>Strike Resistant Design</strong><br /> Top mounting for the delicate composite wings protects them from accidental bottom strikes</p> <p><strong>Quik-Fit plate</strong><br /> Fast and easy foil attachment to any board with 165 x 90 plate spacings without removing the screws</p> <p><strong>Modular Design</strong><br /> Fuselage compatibility with all other Shinn wings and stabilisers for future, cost effective upgrades</p> <p><strong>Padded Travel Case</strong><br /> Supplied in a padded case for minimal space and peace of mind when traveling</p>
<h2><strong>Now available the new Shinn Model Mega K Kitesurfing Hydrofoil at S2AS!</strong></h2> <p>The Mega K is the most versatile wing in the Shinn range.</p> <p>Originally designed with Surf and SUP in mind it’s also proved to be exceptionally well suited to kite-foiling in waves and in extreme light winds. With a surprisingly high top speed for a wing of this size and yet still un-believable low speed starting (as low as 8 kph) the Mega K leads us down the path of multi-discipline wings.</p> <p>Designed to provide lift at low speeds and yet retain enough top end to keep it fun the Mega K provides stability and manoeuvrability making it perfect for SUP, SURF or Kitewave foiling in small to medium sized waves. Utilizing a low to mid aspect ratio wing with a high rake delta outline has allowed us to provide the massive speed range needed to handle both starting and control on the wave face. The main wings blended winglets work with the flat stabiliser to give great directional stability without limiting the carving potential even at crazy slow speeds.</p> <p>So why do we recommend the Mega K for extreme light wind kiting as well? Low speed starting is the key where the challenge is to generate enough speed to start foiling. With the Mega K the power needed to water start is already enough to fly and with a top speed in excess of 35 kph you’ll be cruising when even other foilers are left sitting on the beach.</p> <h3><strong style="font-size:15.21px">Features:</strong></h3> <h3><strong style="font-size:13px">Carbon Re-enforced Mid-low aspect ratio wing</strong></h3> <p>Medium/Low aspect ration, delta design Wing 1200 cm</p> <p><strong>ST3 G10 Inverted Profile Stabiliser</strong><br /> 280 cm² with integrated yaw control</p> <p><strong>Amazingly Versatile Speed range</strong><br /> Take off around 8 kph with top speeds > 35 kph</p> <p><strong>Multiple Mast Lengths</strong><br /> Available with 40, 60, 75 or 90 cm mast (recommended for kiting 90cm, for surf and SUP 75cm)</p> <p><strong>Strike Resistant Design</strong><br /> Top mounting for the delicate composite wings protects them from accidental bottom strikes</p> <p><strong>Quik-Fit plate</strong><br /> Fast and easy foil attachment to any board with 165 x 90 plate spacings without removing the screws</p> <p><strong>Modular Design</strong><br /> Fuselage compatibility with all other Shinn wings and stabilisers</p> <p><strong>Padded Travel Case</strong><br /> Supplied in a padded case for minimal space and peace of mind when traveling</p>
<h2><strong>Airush Progression Foil Kiteboard Now Available From S2AS</strong></h2> <ul> <li><strong>Ideal for entry level and intermediates or heavier riders in light winds.</strong></li> <li><strong>Based on the extremely successful Core Foil board 145 x 51cm.</strong></li> <li><strong>Advanced bottom shape for easy touch downs and carving.</strong></li> </ul> <p>The perfect entry-level foil board with the same design fundamentals as our narrower Core foil board, making it extremely versatile, taking you from your first steps in foiling to advanced freeride.</p> <p>The Progression Foil Board outline features a relatively narrow tail with the wide point further forward. The wider nose optimizes the stability when touching down or getting started, while the narrower tail allows the board to be edged into the wind more aggressively, specifically when using a shorter mast or for the more advanced rider going upwind.</p> <p>The refined bottom shape features bevel rails in the tail with a release edge merging to the convex nose bottom shape for soft touch downs on any angles.</p> <p>Configuration for footstraps can be set as a three strap setup with offset front straps or with a single front strap.</p> <p>The foil attachment features a double box system allowing the board to be compatible with most vertical mast, plate-style foils.</p> <p>4'9" (145CM) | 20" (51CM) | 2.1" (5.3CM) | 25.5L</p> <p><strong>Crust Core</strong></p> <p>The Hybrid Epoxy Construction takes key aspects our Custom Epoxy with a medium-density EPS core from our premium fused EPS technology. This core in then compression molded to shape creating an extremely durable core. <br /> Covering the core, the custom laminate has been developed to deal with the demands of kiting with extensive reinforcing around the standing area and foil inserts.</p> <h3> </h3>
<h2><strong>2019 Airush Core Foil Board V3 Kiteboard Now Available From S2AS</strong></h2> <ul> <li><strong>Balancing ease of use with performance.</strong></li> <li><strong>Compatible with most plate foils on the market.</strong></li> <li><strong>Unique hull shape for effortless touchdowns and carving.</strong></li> </ul> <p>The Core Foil Board is 4cm narrower than the Progression Foil Board, appealing to the more advanced rider, where the narrower width enables higher angles when edging, while maintaining length for a more freerace-oriented feel.</p> <p>When looking at the outline, the Core Foil Board features a relatively narrow tail with the wide point further forward. The wider nose optimizes the stability when touching down or getting started, while the narrower tail allows the board to be edged to windward more aggressively, specifically when using a shorter mast or for the more advanced rider going upwind.</p> <p>The refined bottom shape features bevel rails in the tail with a release edge merging to the convex nose bottom shape for soft touchdowns on any angles.</p> <p>Configuration for footstraps can be set as a three strap setup with offset front straps or with a single front strap.</p> <p>The foil attachment system now features a double box system allowing the board to be compatible with most vertical mast, plate style foils.</p> <p>4'9" (145CM) | 18.5" (47CM) | 2.1" (5.3CM) | 23.5L</p> <p><strong>Custom Epoxy</strong></p> <p>Custom Epoxy offers the flex and feel of a classic surfboard, with the increased durability of the kite specific construction. <br /> <br /> We start with a medium-density EPS core (35 Kg/per m3, for the tech heads) developed from our premium fused EPS technology. When using a single skin construction, a denser core is ideal, specifically in the thinner, lower volume boards, such as the Converse. <br /> <br /> Covering the core, the laminate has been extensively reinforced to deal with the demands of kiting with up to five layers in the standing area, and a final layer of Innegra under the heels. Innegra is the lightest fiber commercially available (lighter than water) and can dissipate tremendous amounts of energy, making it ideal for high impact areas. <br /> <br /> Custom EPS offers the flex and feel of a classic surfboard, with the increased durability of the kite specific construction. All custom epoxy surfboards include footstrap inserts.</p>
A date has not been selected for this lesson. If you would like to select a date, choose cancel and select from the calendar. Otherwise continue with the booking, and contact us on (01202) 738 448 at anytime in the future to select a date.
