Stand Up Paddle Board Accessories

Product Code: 35357

<h2><strong>Take a look at the Dakine Tie Down Strap 20' at S2AS!</strong></h2><p>The Dakine 20' Tie Down Strap makes car roof rack transportation a cinch. These are offered as a 20-foot single strap. The Tie Down Strap features the secure tightening of heavy-duty 1-3/8-inch cam buckle.</p><h3><strong>Features:</strong></h3><p>- Heavy duty 1 [ 25mm ] cam buckle<br/>- Carrying bag<br/>- Single strap</p>

Product Code: 35355

<h2><strong>Take a look at the Dakine Baja Tie Down Straps 12' at S2AS</strong></h2><p>- Heavy Duty 1 3/8" [35mm] cam buckle<br/>- Integrates with Dakine surf travel boardbags<br/>- Neoprene buckle housing<br/>- Carrying Bag <br/>- Set of Two</p>

Product Code: 35353

<h2><strong>Take a look at the Dakine Rack Pads at S2AS!</strong></h2><p>The Dakine Rack Pads fit your existing roof rack crossbars to provide padded protection for transporting surfboards. These 28-inch wide rack pads are sold in pairs and feature custom extruded foam covered with durable 600D polyester fabric, a hook and loop closure holds the foam in place.</p><h3><strong>Dimensions:</strong></h3><p>- 28" [ 71cm ] - Set of two</p>

Product Code: 35348

<h2><strong>Take a look at the Dakine Mission Surf Roll Top Sling Pack 10L at S2AS!</strong></h2><p>When your mission calls for traveling light, the Mission Surf Roll Top sling backpack has just enough space for the basics. A roll-top seals the main compartment to keep gear dry or isolate your wet clothes. Two organizer pockets keep the everyday stuff separate. It's set up to wear as a sling bag or a waist pack depending on where you're headed.</p><h3><strong>Features:</strong></h3><p>- Limited Lifetime Warranty<br/>- Seam-sealed waterproof roll-top pocket<br/>- Breathable mesh back panel<br/>- Two organization pockets separate from wet compartment<br/>- Can be worn over shoulder as a sling or around waist as a hip pack</p><h3><strong>Dimensions:</strong></h3><p>- 305 cubic inches [ 5L ]<br/>- 10 x 9 x 3" [ 25 x 22 x 7cm ]</p><h3><strong>Materials:</strong></h3><p>- BLACK: 600D recycled polyester plain weave with water repellent finish, bluesign® approved material.<br/>- Kassia Element: 600D recycled polyester ripstop with print and water repellent finish, bluesign® approved material.<br/>- GRIFFIN: 600D polyester diamond dobby weave with PU coating, bluesign® approved material.<br/>- KASSIA ELEMENTAL: 600D recycled polyester plain weave with print and water repellent finish, bluesign® approved material / 600D recycled polyester heather plain weave with water repellent finish, bluesign® approved material.</p>

Product Code: 35349

<h2><strong>Take a look at the new Dakine Aero Rack Pads at S2AS!</strong></h2><p>The Dakine Aero Rack Pads are the answer to a more aerodynamic foam pad for your existing roof rack crossbars. Transport your surfboards with these 18-inch wide rack pads with upper padding and a sleek hook-and-loop closure holding them in place. The Aero Rack Pads are offered in two sizes to fit a range of crossbar circumferences.</p><h3><strong>Features:</strong></h3><p>- 2 Year Limited Warranty<br/>- Set of two rack pads<br/>- Only pads top of bar for sleek fit<br/>- Non fading UV resistant 600D polyester material<br/>- Hook and loop closure</p><h3><strong>Dimensions:</strong></h3><p>- 18" [ 46cm ] long pad - Set of two. Fits regular 5.5-8" [ 14-20cm ] bar circumference</p>

Product Code: 35352

<h2><strong>Take a look at the Dakine Rack Pads at S2AS!</strong></h2><p>The Dakine Rack Pads fit your existing roof rack crossbars to provide padded protection for transporting surfboards. These 18-inch wide rack pads are sold in pairs and feature custom extruded foam covered with durable 600D polyester fabric, a hook and loop closure holds the foam in place.</p><h3><strong>Dimensions:</strong></h3><p>- 18" [ 46cm ] - Set of two</p>

Product Code: 35356

<h2><strong>Take a look at the Dakine Tie Down Straps 12' (Set of Two) at S2AS!</strong></h2><p>- Heavy Duty 1 3/8" [35mm] cam buckle<br/>- Carrying Bag <br/>- Set of Two</p>

Product Code: 35351

<h2><strong>Take a look at the new Dakine Aero Rack Pads at S2AS!</strong></h2><p>The Dakine Aero Rack Pads Long are the ideal larger surfboard roof rack transport solution in a sleek aerodynamic design. This set of two foam pads offer 34-inch wide top of rack padding for transporting surfboards up top.</p><h3><strong>Features:</strong></h3><p>- 2 Year Limited Warranty<br/>- Set of two rack pads<br/>- Only pads top of bar for sleek fit<br/>- Durable 600D polyester material<br/>- Hook and loop closure<br/>- Fits regular 5.5-8" [ 14-20cm ] bar circumference</p>

Product Code: 35354

<h2><strong>Take a look at the Dakine Rack Pads 34" at S2AS!</strong></h2><p>The Dakine Rack Pads Long foam crossbar covers allow easy roof transport of your larger surfboards. Sold in sets of two, these longer 34-inch pads provide a layer of foam cushioning in transit.</p><h3><strong>Dimensions:</strong></h3><p>- 34" [ 86cm ] - Set of two</p>

Product Code: 34615

<h2><strong>Take a look at the new Jobe Dual Life Vest&nbsp;at S2AS!</strong></h2> <p>The Jobe Dual unisex vest is a 50N ISO certified buoyancy aid. The vest is made out of strong and lightweight nylon on the outside and EPE foam on the inside. The soft nylon sides and the adjustable webbing straps make the vest suitable to almost all body sizes and shapes. The D-rings make sure you can safely use this vest while coasting on your boat or PWC.</p> <h3><strong>Features:</strong></h3> <ul> <li>&nbsp;50N ISO-certified (buoyancy aid)</li> <li>&nbsp;Adjustable webbing strap: 1&quot; | 2,5cm (3x)</li> <li>&nbsp;Comfortable due to nylon sides</li> <li>&nbsp;Lightweight EPE-foam</li> <li>&nbsp;Safety D-ring attachment to attach an emergency cord</li> <li>&nbsp;Strong &amp; lightweight nylon fabric</li> <li>&nbsp;Unisex fit</li> <li>&nbsp;Water drainage system</li> <li>&nbsp;Strong YKK Buckles</li> </ul>

Product Code: 34733

<h2><strong>Take a look at the Ride Engine Hoof Hook at S2AS!</strong></h2> <p>The Ride Engine Hoof Hook is a foostrap that looks like no other. It offers a locked in feel and still provides adequate leverage over the board, but gives you the confidence to easily disengage from your board at any time. No more twisted ankles, no more sketchy crashes whilst you&#39;re foiling and alot easier to jump away from your foil to prevent crashes.</p> <h3><strong>Package Includes:</strong></h3> <p>2 Hoof Hooks &amp; Installation hardware</p>

Product Code: 34735

<h2><strong>Take a look at the Ride Engine Manta 84 Wing at S2AS!</strong></h2> <p>The Manta 84 wing is designed for SUP foiling, this is due to the need of a larger surface area and lift needed to get a larger, heavier paddle board and cruising on small waves and rolling swell. The Manta 84 is constructed with carvon composite, which offers unrivelled durability and is much more efficient. A larger, flatter profiled wing equates to a mich more stable, floating feeling ride whilst the invested gull wing shape allows for crusing at faster speeds without having to pump as much as than many large-format wings require.</p> <h3><strong>Package Includes:</strong></h3> <p>Manta 84 wing</p>

Product Code: 34736

<h2><strong>Take a look at the Ride Engine 76cm Manta Wing at S2AS!</strong></h2> <p>The Mant 76 foil wing is designed for surf foilers who want an approachable and fun wing for tiny to medium size waves. It is the wing that is featured in the Futura Surf Foil package. It provides stability and lift due to it&#39;s shape and surface area which gives a great progressive foiling wing that taps into the smallest waves. The inverted gull wing shape which is unique to Ride Engine makes the wing surprisingly fast and agile for a wing of it&#39;s size.</p> <h3><strong>Package includes:</strong></h3> <p>Manta 76 Wing</p>

Product Code: 34738

<h2><strong>Take a look at the 99cm Manta Wing with S2AS!</strong></h2> <p>Need maximum lift to get you up onto those stable glides? Then this enlarged version of the popular Manta 76 and 84 foil wings from Ride Engine is for you. This wing has the largest surface area of any wing in the Ride Engine line it is the ideal option for bigger riders or for surfers and SUP foilers who require a setup with enough lift and glide to cruise on even the smallest swell. Packed with performance and the ability to pump large flat sections the inverted full wing shape also give it a better top speed.</p> <h3><strong>Package Includes:</strong></h3> <p>Manta Wing 99cm</p>

Product Code: 34739

<h2><strong>Take a look at the 60cm Mobula Wing with S2AS!</strong></h2> <p>A slimmer profiled wing, but modelled from the shape of the Manta Wings, the Mobula enables a foiler to extend their ability into larger, faster waves. Also the weapon of choice for smaller riders looking for a foil wing with a reduced span which makes the lift created a lot more controllable and precise.</p> <h3><strong>Package Includes:</strong></h3> <p>Mobula Wing 60cm</p>

Product Code: 34740

<h2><strong>Take a look at the Ride Engine Futura 61cm (24Inch) Foil mast at S2AS!</strong></h2> <p>Ride Engine replacement 61cm (24inch) aluminium foil mast.</p> <h3><strong>Package Includes:</strong></h3> <p>Futura 61cm Mast</p>

Product Code: 34741

<h2><strong>Take a look at the Ride Engine Futura 46cm (18inch) Foil mast at S2AS!</strong></h2> <p>Ride Engine replacement 46cm (18inch) aluminium foil mast.</p> <h3><strong>Package Includes:</strong></h3> <p>Futura 46cm Mast</p>

Product Code: 34742

<h2><strong>Take a look at the Ride Engine Futura 90cm (35.5inch) foil mast with S2AS!</strong></h2> <p>Ride Engine replacement 90cm(35.5inch) aluminium foil mast.</p> <h3><strong>Package Includes:</strong></h3> <p>Futura 90cm Mast</p>

Product Code: 34743

<h2><strong>Take a look at the Ride Engine Futura 71cm (28inch) foil mast with S2AS!</strong></h2> <p>Ride Engine replacement 71cm (28inch) aluminium foil mast.</p> <h3><strong>Package Includes:</strong></h3> <p>Futura 71cm Mast</p>

Product Code: 34744

<h2><strong>Take a look at the Ride Engine 42cm Rear Stabilizer Wing at S2AS!</strong></h2> <p>The 42cm rear stabilizer wing can be partnered with any of the front wings provided not only by Ride Engine, but other brands on the market.</p> <h3><strong>Package Includes:</strong></h3> <p>42cm Rear Stabilizer.</p>

Product Code: 34745

<h2><strong>Take a look a the Ride Engine 48cm Rear Stabilizer Wing at S2AS!</strong></h2> <p>The 48cm rear stabilizer wing can be partnered with any of the front wings provided not only by Ride Engine, but other brands on the market.</p> <h3><strong>Package Includes:</strong></h3> <p>48cm Rear Stabilizer.</p>

Product Code: 34746

<h2><strong>Take a look at the Ride Engine Hardware kite with S2AS!</strong></h2> <p>Replacement hardware kit for Ride Engine Futura foils.</p> <h3><strong>Package Includes:</strong></h3> <ul> <li>2-M8x40mm Pedestal Bolts</li> <li>2-M6x30mm Rear Wing Screws</li> <li>2-M8x45mm Fuselage Bolts (A Position)</li> <li>2-M8x50mm Countersunk Bolts (B Position)</li> <li>2-M8x23mm Mast Cap Bolts (B Position)</li> <li>1-M6x25mm Set Screw</li> </ul>

Product Code: 34748

<h2><strong>Take a look at the Ride Engine Top Plate with S2AS!</strong></h2> <p>Compatible with the Ride Engine&#39;s surf foil track box, and all Slingshot foil board aswell as most four hole track mounting systems, this aluminium top plate from Ride Engine is lightweight and robust.</p> <h3><strong>Package Includes:</strong></h3> <p>Ride Engine Futura Top Plate</p>

Product Code: 34749

<h2><strong>Take a look at the Ride Engine Tuttle Adapter with S2AS!</strong></h2> <p>The Ride Engine Tuttle Box adapter is designed to pair your Ride Engine foil with a tuttle box connection. A flanged design provided maximum strength and support while elimating any movement.</p> <h3><strong>Package Includes:</strong></h3> <p>Ride Engine Tuttle Adapter.</p>

Product Code: 34750

<h2><strong>Take a look at the&nbsp;Ride Engine Futura Rear Wing Shim at S2AS!</strong></h2> <p>Rear wing shim for Ride Engine&#39;s Futura Foil</p>

Product Code: 34751

<h2><strong>Take a look at the Ride Engine Futura Forged Shift Fuse 61cm (24&quot;) at S2AS!</strong></h2> <p>Find your personal comfort zone. The ability to adjust your wing position fore or aft. Move the foil from position A to B to accommodate board setup, rider preference, and skill level.&nbsp;&nbsp;</p> <p>&nbsp;</p>

Product Code: 34772

<h2><strong>Take a look at the Slingshot Hover Glide 71cm Aluminium mast with S2AS!</strong></h2> <p>Looking for a slightly shorter mast? A mast that will work well for SUP/Surf foiling? Then the 71cm (28inch) Slingshot Aluminium mast is the one that fits that criteria.</p>

Product Code: 34773

<h2><strong>Take a look a the Slingshot Hover Glide 61cm Aluminium Mast with S2AS!</strong></h2> <p>Starting to get your first foil runs? Want a little more mast length to move onto the next stage? Or spend the majority of your foiling sessions riding in shallower waters? The 61cm (24inch) Slingshot Aluminium mast is the perfect length for you. Not so short that you feel liek you are back at the beginning of your foiling journey, but not too long that any slight decrease in ride height you hit the bottom.</p>

Product Code: 34774

<h2><strong>Take a look at the Slingshot Hover Glide 46cm Aluminium Mast with S2AS!</strong></h2> <p>The 46cm (18inch) Slingshot Aluminium mast is the perfect size for your first foiling experience. Less riding height, means a shorter distance to fall, and it also means that you can have a lot more input on the wings below you to begin with. Already foiling, but your spot is always shallow or has a large tidal range? The the shorter foil will save any scuffs on the sea floor.</p>

Product Code: 34775

<h2><strong>Take a look at the Slingshot HG SUP/Surf/Wake Rear wing shim with S2AS!</strong></h2> <p>Small bits of material that make big differences in the way your foil performs! We all mislay vital bits of equipment from time to time, it&#39;s a good job we have replacements!</p>

Product Code: 34777

<h2><strong>Take a look a the Slingshot HG Forged 78cm Switch Fuselage with S2AS!</strong></h2> <p>A creation from Slingshots design team, the Switch 78cm fuselage. A fuselage that can be used in either direction, fitting multiple brands, styles and feelings. Having the ability to change the feel of your foil to suit your riding style is crucial with foiling. Everyone has a different balance point throughout their body, so having the adjustability that the switch fuselage offers is a game changer.</p>

Product Code: 34779

<h2><strong>Take a look at the Slingshot Forged Shift 61cm Fuselage with S2AS!</strong></h2> <p>The Slingshot 61cm Shift fuselage offers up some variations on where you can set your wings when foiling. Whether it to fit another brands foil wings or board, or whether you like to have different options when using your foil in different disciplines, the Shift fuselage is definatly one to look at.</p>

Product Code: 34780

<h2><strong>Take a look at the Slingshot Hover Glide Tuttle connector with S2AS!</strong></h2> <p>The Slingshot Tuttle connector is an integrated tittle base designed for Deep Tuttle boxes which provides strength and eliminates any movement. This design comes with an integrated base flange that transfers loads over a larger area of the board, which means it is possible to use with another foil with an existing board. Unlike others, the Tuttle Connector from Slingshot comes reinforced, which means it will happily handle the load of foiling.</p>

Product Code: 34782

<h2><strong>Take a look at the Slingshot HG Carbon Rear Wing 42cm Stabilizer with S2AS!</strong></h2> <p>A 42cm carbon rear wing stabilizer. Compatible with all of the Slingshot Hover Glide Foils.</p>

Product Code: 34783

<h2><strong>Take a look at the Slingshot Foil Hardware Kit for Fkite, Fsurf and Fsup with S2AS!</strong></h2> <p>Need to freshen up your hardware, or managed to misplace some fot eh bolts, we&rsquo;ve got your back! Compatiboe with all Hover Glide Fkite, Fwake, Fsurf and Fsup foils.</p> <h3><strong>Package Includes:</strong></h3> <ul> <li>2-M8x40mm Pedestal Bolts</li> <li>2-M6x30mm Rear wings screws</li> <li>2-M8x45mm Fuselage bolts (A-position)</li> <li>2-M8x50mm Countersunk Bolts (B-position)</li> <li>2-M8x23mm Mast Cap bolts (B Position)</li> <li>1-M6x25mm Set Screw</li> </ul>

Product Code: 34786

<h2><strong>Take a look at the Slingshot Hover Glide FSUP V3 case with S2AS!</strong></h2> <p>This low profile, padded case from Slingshot is designed specifically for easy transport for your FSUP foil, making sure it is always completely safe from any knocks. The case is made from a durable canvas material which is molded to hold its shape. It has enough space to hold all of your foil component including wings, mast, fuselage and hardware.</p>